Nortel Networks 2210 manual Cleaning your handset

Cleaning your handset

Cleaning your handset

The 2210 Wireless Handset occasionally needs to be cleaned to maintain appearance. In general, wiping the handset surface with a clean water-dampened cloth or paper towel removes most films or residues.

If more rigorous cleaning is required, you can use:

•A mild detergent solution. Be sure to wipe away any detergent residue with a plain water-dampened cloth.

•Any general-purpose household glass and surface cleaner. Do not spray the handset directly. Spray the cleaner on a soft cloth or paper towel, then wipe the handset.

•Pre-treated cloths, like those used for eyeglasses or cameras.

•Pre-moistened towelettes. Avoid those containing lanolin or aloe as it leaves a slippery residue.

•Isopropyl alcohol, applied by a damp cloth or paper towel. When using alcohol, do not rub the key pad characters vigorously, as this will significantly degrade legibility.

IMPORTANT!

•Do not use furniture polishes, waxes, or plasticizer-based cleaner.

•Do not use lanolin, aloe, glycerin, or other skin care products.

•Do not apply any solvent such as acetone or mineral spirits.

•Do not directly spray or immerse the handset.

If the headset connector becomes dirty, you may experience a scratchy or intermittent signal. To clean the connector, dip the padded end of either a wooden or paper handled cotton swab in isopropyl alcohol. Gently insert in the connector and twist, repeating several times. If available, blow compressed air into the connector to clear debris.

23