GE 55927740 manual Setting the Incoming Message Length, Setting the Rings to Answer

3.Once the first digit is set, press ENTER.

4.Repeat steps 2-3 until all the digits of the area code are set.

5.When finished, press ENTER to confirm. The unit beeps.

NOTE: To skip to the next setting, press MENU. To exit setup, press EXIT.

TIP: You can use the keypad to enter all the digits in one step. To enter 317, press 3,1, and 7. Then press ENTER.

Setting the Incoming Message Length

This setting allows you to set the maximum length of time allowed for a single incoming message. You can choose from 1-4 minutes.

1.If you just adjusted the Local Area Code menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until MESSAGE LENGTH is displayed.

2.Use NEXT or REVIEW or press the keypad number (1-4) for the desired setting.

3.When finished, press ENTER to confirm. The unit beeps.

NOTE: To skip to the next setting, press MENU. To exit setup, press EXIT.

Setting the Rings to Answer

This setting allows you to set the number of rings before the unit answers a call. You can choose from 2-8 or Toll Saver (see  “Toll Saver.”)

1.If you just adjusted the Message Length menu, skip to step 2. If you haven’t adjusted any other setting, press and release the MENU button until SET RINGS TO ANS is displayed.

2.Use NEXT or REVIEW or press the keypad number (2-8, Toll Saver) for the desired setting.

3.When finished, press ENTER to confirm. The unit beeps.

NOTE: To skip to the next setting, press MENU. To exit setup, press EXIT.

13