SETTING THE TIME/DAY
This setting allows you to set the current time and day for theTime/Day stamp attached to each message.
Range of Settings |
| Default Settings | ||
Time |
|
| ||
|
| Time | 12 a.m. Sunday | |
Hour | 12 a.m. - 11 p.m. |
| ||
| Rings to Answer | 4 | ||
Minute | 0 - 59 |
| ||
| Message time | 2 | ||
Day | Sunday - Monday |
| ||
| Security Code | 123 | ||
Rings | 2,3,4,5 toll saver |
| ||
|
|
| ||
to Answer |
|
|
|
|
Message time | 1,2,3,4, minutes |
|
|
|
Security | 0 - 9, 0 - 9, 0 - 9 |
|
|
|
Code |
|
|
|
|
HOUR
1.Press and hold the STOP/SET button for two seconds, then release to access the set up menu.The unit announces, “Time (the current time and day setting) To set hour, press next...press set to continue.”
2.To change the hour, press and release the NEXT or PREVIOUS button and the unit announces an hour, such as “12am, 1am, 2am,” or “12am, 11pm, 10pm.”
3.After choosing the hour, press and release the STOP/SET button to store the hour.The unit enters the Minute menu.
MINUTES
1.The unit announces, “(the current minutes setting)To set minutes, press next...press set to continue.”
10