ONE TOUCH KEYS
Only available for digital telephones with One Touch keys. With the handset in cradle
SET
OPress FNC key
OPress LNR/SPD key
OPress One Touch key to be programmed O Program one of the following:
mOUTSIDECALL - Dial 0 and trunk access code i.e. 0 then Dial number
lINTERNAL CALL - Dial 1 and station number for Direct Station Select (DSS)
lFEATURE THAT DOESN'TUSE FNC KEY
-Dial 1 and feature access code
(eg. Paging All Internal Zones - Dial 170)
FEATURE THAT STARTS WITH FNC KEY
-Dial # and feature access code
(eg. Do Not Disturb - Dial # 6 0 ANS FNC)
OPress FNC key
CHECK
OPress FNC key
OPress programmed One Touch key
CLEAR
OPress FNC key
QPress LNR/SPD key
OPress programmed One Touch key
O Press FNC key
NOTE 1: For outside calls only - press LNR/SPD key to insert a pause or RECALL key to store a
hookflash.
NOTE 2: For feature access codes - FNC CNF,
RECALL, LNR/SPD, SPKR, ANS or HOLD keys can be entered by first pressing the ANS key.
NOTE 3: A name can be entered for outside numbers programmed - refer to NDK 9000 -
STATION OPERATIONSMANUAL
From designated digital telephones only. With t h e handset in cradle
OPress FNC key
ODial 9#. FNC LED flashes, changing the mode
to time adjustment mode.
0Adjust the hours and minutes with the dial pad. Dial# to move the display cursor to the right.
Dial* to move the display cursor to the left.
OPress the HOLD key. Clock display is recorded,
changing the date adiustment mode.
OAdjust the day of the week using the
RECALL key.
0Dial # to move to the Day
0Adjust the Day with the dial pad
ODial the Month using the RECALL key O Dial # to move to the Year
O Adjust the Year with the Dial pad O Press FNC key to save the settings
NOTE: To set the time only press the FNC key instead of the HOLD key after adjusting the time.