INTERNAL RINGING CALLS
Lage LED flashing red 0' Lift handset
0Converse
VOICE ANNOUNCED INTERNAL CALLS
0Ensure MIC LED is lit
0Respond handsfree or lift handset
OUTSIDE RINGING CALtS
Large LED flashing green
Press flashing ANS key or Line key
OLift handset O Converse
NOTE : If Ringing Line Preference is set i.e. ANS key is preset (ANS key LED is tumed ON by FNCe ANS), then just lift handset to answer outside ringing calls.
CALL PICKUP
0Lift handset
0Dial Call Pickup code:
Same Tenant | 61 |
(internal or transferred calls only) |
|
Other Tenant (outside calls only) | 60 |
OConverse
INTERNAL CALLS
0Lift handset OR press SPKR key O Dial extension number
OR
Press Feature Access key or One Touch key programmed for Direct StationSelection(DSS)
NOTE: When calling a station that is not busy,
dialling 1 after the station number will change ringing tone to voice or voice to ringing tone.
OUTSIDE CALLS
OLift handset OR press SPKR key
0Press CALL key OR an idle outside Line key
0Dial telephone number
NOTE:If CALL key is preset (i.e. CALL key LED is turned ON by
handset and dial telephone number.
STATION/SYSTEM SPEED DIAL
To dial an outside number from the
Speed Dial Memory:
0Press LNR/SPD key and dial Speed Dial
Memory location:
Station Speed Dial
OR
Press Feature Access key or One Touch key
programmed for Station speed Dial
0Lift handset
NOTE: 1000System Speed Dial locations