STATION/SYSTEM SPEED D W
Each station can have 10 speed dial memories and can access the system's90 Speed dial memories. With the handset in the cradle
SET
Press FNC key
0Press LNR/SPD key
ODial Speed Dial Memory location:
ODial trunk access code i.e 0
0Dial outside numbers to be stored (24 digits maximum)
OPress FNC key
CHECK
0Press CNF key
0Press LNR/SPD key
ODial Speed Dial Memory location
CLEAR
OPress FNC key
0Press LNR/SPD key
ODial Speed Dial Memory location
O Press FNC key
NOTE 1: Only designated stations are allowed
to program or clear System Speed Dial locations. NOTE 2: Press LNR/SPD key to insert a pause or R E C A L L key to store a hookflash.
NOTE 3: A name can be entered for each Speed Dial Number programmed - refer to NDK 9000 STATION OPERATIONS MANUAL
NOTE 4: 1000 System Speed Dial locations
FEATURE ACCESS KEYS
Only available for keys not designated as Line keys or Call Park keys. With the handset in the cradle
SET
2Press FNC key
3Press LNR/SPD key
2Dial Speed Dial Memory location
3Press Feature Access key to be programmed
2Program one of the following:
OUTSIDE CALL - Dial 0 and trunk access code i.e. 0 then Dial number
INTERNAL CALL - Dial 1 and station number for Direct Station Select (DSS)
FEATURE THAT DOESN'TUSE FNC KEY
-Dial 1 and feature access code
(eg. Paging All lntemal Zones - Dial 170)
FEATURE THAT STARTS WITH FNC KEY
-Dial # and feature access code
(eg. Do Not Disturb - Dial #60 ANS FNC)
0Press FNC key
CHECK
Press FNC key
OPress programmed Feature Access key
CLEAR
3Press FNC key
OPress LNWSPD key
OPress programmed Feature Access key
O Press FNC key
N0TE : For outside calls only - press LNR/SPD key for a pause or RECALL key for a hookflash.
NOTE 2:For feature access codes - FNC CNF, RECALL LNR/SPD, SPKR, ANS or HOLD keys can be entered by first pressing the ANS key
NOTE 3: A name can be entered for outside numbers programmed - refer to NDK 9000 -
STATION OPERATlONS MANUAL