NEC SV7000 Manual Intercom, To bridge into a manual intercom call, PM TUE 13 APR Calling party

Page 44

Manual Intercom

To initiate

Press MICM, lift handset or press Speaker, ringback tone is heard. Press the SIG key if it is desired for the called station to hear ringing.

To answer

MICM key flashes, indicating an incoming call. Ring tone may also be heard. Press MICM.

Lift handset or press Speaker, LED lights solid green.

If called station is engaged in a non-intercom call, the station may press MICM after placing original caller on hold (with Hold key).

.

 

Called party

ICM

2

4:26 PM

TUE 13 APR 2004

 

 

 

Calling party

ICM

1

4:26 PM

TUE 13 APR 2004

 

 

To bridge into a manual intercom call

Note: Bridging is an optional feature.

 

Overriding party

Press MICM, lift handset or press Speaker.

 

OVERRIDE

 

1

 

 

 

4:26 PM

TUE 13

APR 2004

A three-party conference is established.

 

 

 

 

 

 

 

 

 

 

 

CONF

 

 

 

4:26 PM

TUE 13

APR 2004

 

 

 

 

Note 1: The SIG key signals the corresponding station when speaking over the intercom path is unnecessary.

Note 2: Two-button Manual Intercom provides one button for signalling and one for talking. A separate signalling button can be used in many ways for the secretary to alert a boss, or vice versa.

– 40 –

Image 44
Contents User Guide Liability Disclaimer NEC CorporationTable of Contents Boss/Secretary MW Lamp Control Face Layout Dterm4D IP Dterm8D and Dterm8D IP Dterm16D and Dterm16D IP Call Indicator Lamp LCD NoteExit Soft KeysFeature Programmable KeysRecall Directory NoteDterm IP Adapter Dterm16LD and Dterm16LD IP Speakerphone Display Feature Name 21 16LD DisplayUser’s Status Network Specification Rear ViewDterm8D IP, 16D IP, 16LD IP, 32D IP Adjustable Removable Base Quick Disconnect Button Cisco Discovery Protocol Base ViewOptional Adapter supported Keys and Lamps Programmable KeysLamps Function Key ActivitiesSIG LCDSoft Keys MIC DNDDefault Function Displays for Each Status Busy MICConnection MIC DND Consultation Hold TransferSoft Key Features CAS CAS-Switch Hook Flash Pick Call Pickup GroupConf Three-way Calling Voice Voice CallSIG Manual Signaling MIC Microphone On/OffButton Hset HeadsetVisit Survivable Remote MGC Rmute Ringer MuteDisplay Function Next Display Function PreviousTerminal Setup with the Up/Down Key RingTo adjust LCD contrast Terminal Setup with the Feature Key To adjust initial receiving volumeMicrophone On/Off RCV VOL SmallRinger TONEn 426 PM TUE 13 APR To select ringer toneTone No Frequency Hz Modulation Hz To activate hands-free To adjust transmission/receiving volumeCall Indicator lamp on/off Dynamic Dial Pad on/off Direct Dial Pad on PM TUE 13 APR Direct Dial Pad OFFLogin/Logout IP Enabled Dterm/Dterm IP Only To LoginTo Logout To Originate an Outside Call To Originate an Internal CallMultiline Appearance To originateTo Originate a Call Using Speed Calling One-touch Buttons To programTo verify with Dterm 4D/8D/16D/16LD/32D Speed SETTo Originate a Call Using Speed Calling Individual/Group To Originate a Call Using Speed Calling SystemTo operate from the Speed Calling System key To operate from the Directory keyTo enter account code after authorization code Account CodeForced Account Code To enterAuthorization Code Voice CallTo enter without account code To enter with account code see aboveUsing the Soft key To Answer a Voice Call Hands FreeMIC Voice Voice Busy Voice RestAutomatic Intercom To initiateTo bridge into an automatic intercom call ICMManual Intercom To bridge into a manual intercom call426 PM TUE 13 APR Calling party Press MICM, lift handset or press SpeakerPress the Dicm key, lift handset or press Speaker Dial IntercomTo bridge into a dial intercom call To Place a Call on Hold To Place a Call on Exclusive HoldTo retrieve If unansweredTo Transfer a Call 426 PM TUE 13 APR Transferred station Or trunk number426 PM TUE 13 APR Transferring station Transfer DDDPM TUE 13 APR MIC ConferenceTo Establish a Broker Call To Answer a Camped-on Call Call Waiting OriginatingTo program call waiting key on one-touch speed calling key To activate call waiting originatingTo answer a waiting call To disconnectWait SET 426 PM TUE APR Called station NumberCall Park To program call park key on one-touch speed calling keyTo park a call To retrieve a parked call from originating stationWhen station within pick-up group rings When a station within the system ringsCall Pick-up Group Call Pick-up DirectOutgoing Trunk Queuing Off-hook Trunk QueuingIf trunk busy Pick UPExecutive Override Last Number RedialIf called station is busy To Recall the Last Number DialedCall Forwarding All Calls To setCall Forwarding Busy Line To cancelForward Cancel Forward Forward SETPM TUE 13 APR MIC Forwarding station Call Forwarding Don’t Answer Logged Out IP Station Call Destination PM TUE 13 APR MIC Call Back Callback SETPM TUE 13 APR Called party CallbackTo repeat To Save and Repeat a NumberTo save To Leave a Message To Answer a MessageTo display To respondTo erase Message CancelVoice Mail System Meet-me Paging To page station aTo answer station B PagingPaging Transfer Station a pagingTransferddd 3 426 PM TUE 13 APR Transfer XxxxBoss/Secretary Transfer SecretaryIf boss accepts call If boss refuses callTo cancel at boss’ station CancelBoss/Secretary MW Lamp Control To set MW at boss’ stationBoss/Secretary Override To program boss/secretary override keyBoss 426 PM TUE 13 APR OptionDND Cancel Do Not DisturbWhile idle on hook DND SETCall Redirect Call Redirects to the Call Forward-Don’t Answer DestinationUsing the Soft Key MIC Privacy Cancel PrivacyWhile off-hook Privacy SETRLS? Privacy ReleaseWait P-RLS? Index Originating a Call Using Speed Calling LCD Indication Indicator O/OFF MW SET/CANCELIcmx MSG Xxxx HhmmpmPrivacy SET/CANCEL Override XxxxPick UP Xxxx RLS SET

SV7000 specifications

The NEC SV7000 is a robust unified communications platform designed to meet the needs of businesses seeking a reliable and feature-rich telephone system. This next-generation communication solution offers a wide range of functionalities that enhance collaboration, productivity, and customer engagement.

One of the standout features of the NEC SV7000 is its scalability. It caters to businesses of all sizes, from small enterprises to large corporations, allowing them to easily expand their communication capabilities as they grow. With support for thousands of users, the SV7000 can adapt to changing business needs without the need for extensive hardware investments.

The SV7000 incorporates advanced VoIP (Voice over Internet Protocol) technology, enabling users to make phone calls over the internet instead of traditional phone lines. This not only reduces costs but also provides greater flexibility in managing communications. The system supports SIP (Session Initiation Protocol) for seamless integration with various applications and devices.

Another key characteristic of the NEC SV7000 is its comprehensive set of unified communications tools. Whether it’s instant messaging, video conferencing, or collaborative workspaces, the system facilitates enhanced communication among team members. This integration of various communication channels helps to streamline workflows and improve overall productivity.

Additionally, the NEC SV7000 features advanced call management capabilities. The platform supports automated attendants, call routing, and voicemail options, ensuring that calls are efficiently managed and that customers receive timely responses. Furthermore, its robust reporting and analytics tools provide insights into call volume, response times, and user performance, allowing businesses to make data-driven decisions.

End-user experience is a priority with the SV7000, and it offers a user-friendly interface that can be accessed through various devices, including smartphones, tablets, and desktop computers. This flexibility allows employees to stay connected and productive regardless of their location.

Moreover, the NEC SV7000 places a strong emphasis on security. The system is equipped with features that protect against unauthorized access and ensures the privacy of communications through encryption and secure protocols.

In summary, the NEC SV7000 is a versatile and powerful unified communications platform that combines scalability, advanced technologies, and robust features to provide businesses with the tools they need to enhance communication and collaboration. Whether for call management, unified communications, or security, the SV7000 stands out as a comprehensive solution tailored for modern business environments.