NEC SV7000 manual To Answer a Camped-on Call, Call Waiting Originating

Page 49

To Answer a Camped-on Call

While engaged in a call, receive the camp-on indication (one short tone burst). Answer LED flashes.

 

Press Answer. Call in progress is placed on hold.

 

Trunk

Trunk

Connection to camped-on call is established.

 

type

number

Press Answer to return to original call. Camped-on call is placed on hold.

 

 

 

CAMP ON DDD

3

By repeating these steps, it is possible to alternate between calls. Display

4:26 PM

TUE 13 APR 2004

indicates connected station or trunk at any given time.

 

 

 

 

 

 

 

Call Waiting – Originating

To program call waiting key (on one-touch speed calling key)

Press Feature.

Press desired one-touch speed key.

Press Recall. ! appears on LCD. (See Note.)

Dial “Call Waiting” feature access code.

Press Feature.

Note: To program a hook switch for transfer or feature activation, press Recall as first digit. ! displays on LCD.

To activate call waiting – originating

Dial desired station number, receive busy tone.

Press CALL WAITING.

Receive special ringback tone.

Call waiting tone is sent to busy station.

 

Called station

 

number

C WAIT

2000

4:26 PM

TUE 13 APR 2004

 

 

– 45 –

Image 49
Contents User Guide NEC Corporation Liability DisclaimerTable of Contents Boss/Secretary MW Lamp Control Face Layout Dterm4D IP Dterm8D and Dterm8D IP Dterm16D and Dterm16D IP LCD Note Call Indicator LampExit Soft KeysProgrammable Keys FeatureRecall Directory NoteDterm IP Adapter Dterm16LD and Dterm16LD IP Speakerphone 21 16LD Display Display Feature NameUser’s Status Rear View Network SpecificationDterm8D IP, 16D IP, 16LD IP, 32D IP Adjustable Removable Base Quick Disconnect Button Optional Adapter supported Base ViewCisco Discovery Protocol Programmable Keys Keys and LampsFunction Key Activities LampsSIG LCDMIC DND Soft KeysDefault Function Displays for Each Status MIC BusyConnection MIC DND Consultation Hold TransferSoft Key Features Pick Call Pickup Group CAS CAS-Switch Hook FlashConf Three-way Calling Voice Voice CallMIC Microphone On/Off SIG Manual SignalingButton Hset HeadsetRmute Ringer Mute Visit Survivable Remote MGCDisplay Function Next Display Function PreviousRing Terminal Setup with the Up/Down KeyTo adjust LCD contrast To adjust initial receiving volume Terminal Setup with the Feature KeyMicrophone On/Off RCV VOL SmallTone No Frequency Hz Modulation Hz To select ringer toneRinger TONEn 426 PM TUE 13 APR Call Indicator lamp on/off To adjust transmission/receiving volumeTo activate hands-free Direct Dial Pad on PM TUE 13 APR Direct Dial Pad OFF Dynamic Dial Pad on/offTo Login Login/Logout IP Enabled Dterm/Dterm IP OnlyTo Logout To Originate an Internal Call To Originate an Outside CallMultiline Appearance To originateTo program To Originate a Call Using Speed Calling One-touch ButtonsTo verify with Dterm 4D/8D/16D/16LD/32D Speed SETTo Originate a Call Using Speed Calling System To Originate a Call Using Speed Calling Individual/GroupTo operate from the Speed Calling System key To operate from the Directory keyAccount Code To enter account code after authorization codeForced Account Code To enterVoice Call Authorization CodeTo enter without account code To enter with account code see aboveTo Answer a Voice Call Hands Free Using the Soft keyMIC Voice Voice Busy Voice RestTo initiate Automatic IntercomTo bridge into an automatic intercom call ICMTo bridge into a manual intercom call Manual Intercom426 PM TUE 13 APR Calling party Press MICM, lift handset or press SpeakerTo bridge into a dial intercom call Dial IntercomPress the Dicm key, lift handset or press Speaker To Place a Call on Exclusive Hold To Place a Call on HoldTo retrieve If unanswered426 PM TUE 13 APR Transferred station Or trunk number To Transfer a Call426 PM TUE 13 APR Transferring station Transfer DDDTo Establish a Broker Call ConferencePM TUE 13 APR MIC Call Waiting Originating To Answer a Camped-on CallTo program call waiting key on one-touch speed calling key To activate call waiting originatingTo disconnect To answer a waiting callWait SET 426 PM TUE APR Called station NumberTo program call park key on one-touch speed calling key Call ParkTo park a call To retrieve a parked call from originating stationWhen a station within the system rings When station within pick-up group ringsCall Pick-up Group Call Pick-up DirectOff-hook Trunk Queuing Outgoing Trunk QueuingIf trunk busy Pick UPLast Number Redial Executive OverrideIf called station is busy To Recall the Last Number DialedTo set Call Forwarding All CallsForward Cancel To cancelCall Forwarding Busy Line PM TUE 13 APR MIC Forwarding station Forward SETForward Call Forwarding Don’t Answer Logged Out IP Station Call Destination PM TUE 13 APR MIC Callback SET Call BackPM TUE 13 APR Called party CallbackTo save To Save and Repeat a NumberTo repeat To Answer a Message To Leave a MessageTo display To respondVoice Mail System Message CancelTo erase To page station a Meet-me PagingTo answer station B PagingStation a paging Paging TransferTransferddd 3 426 PM TUE 13 APR Transfer XxxxSecretary Boss/Secretary TransferIf boss accepts call If boss refuses callCancel To cancel at boss’ stationBoss/Secretary MW Lamp Control To set MW at boss’ stationTo program boss/secretary override key Boss/Secretary OverrideBoss 426 PM TUE 13 APR OptionDo Not Disturb DND CancelWhile idle on hook DND SETCall Redirects to the Call Forward-Don’t Answer Destination Call RedirectUsing the Soft Key Privacy MIC Privacy CancelWhile off-hook Privacy SETWait P-RLS? Privacy ReleaseRLS? Index Originating a Call Using Speed Calling LCD Indication MW SET/CANCEL Indicator O/OFFIcmx MSG Xxxx HhmmpmOverride Xxxx Privacy SET/CANCELPick UP Xxxx RLS SET

SV7000 specifications

The NEC SV7000 is a robust unified communications platform designed to meet the needs of businesses seeking a reliable and feature-rich telephone system. This next-generation communication solution offers a wide range of functionalities that enhance collaboration, productivity, and customer engagement.

One of the standout features of the NEC SV7000 is its scalability. It caters to businesses of all sizes, from small enterprises to large corporations, allowing them to easily expand their communication capabilities as they grow. With support for thousands of users, the SV7000 can adapt to changing business needs without the need for extensive hardware investments.

The SV7000 incorporates advanced VoIP (Voice over Internet Protocol) technology, enabling users to make phone calls over the internet instead of traditional phone lines. This not only reduces costs but also provides greater flexibility in managing communications. The system supports SIP (Session Initiation Protocol) for seamless integration with various applications and devices.

Another key characteristic of the NEC SV7000 is its comprehensive set of unified communications tools. Whether it’s instant messaging, video conferencing, or collaborative workspaces, the system facilitates enhanced communication among team members. This integration of various communication channels helps to streamline workflows and improve overall productivity.

Additionally, the NEC SV7000 features advanced call management capabilities. The platform supports automated attendants, call routing, and voicemail options, ensuring that calls are efficiently managed and that customers receive timely responses. Furthermore, its robust reporting and analytics tools provide insights into call volume, response times, and user performance, allowing businesses to make data-driven decisions.

End-user experience is a priority with the SV7000, and it offers a user-friendly interface that can be accessed through various devices, including smartphones, tablets, and desktop computers. This flexibility allows employees to stay connected and productive regardless of their location.

Moreover, the NEC SV7000 places a strong emphasis on security. The system is equipped with features that protect against unauthorized access and ensures the privacy of communications through encryption and secure protocols.

In summary, the NEC SV7000 is a versatile and powerful unified communications platform that combines scalability, advanced technologies, and robust features to provide businesses with the tools they need to enhance communication and collaboration. Whether for call management, unified communications, or security, the SV7000 stands out as a comprehensive solution tailored for modern business environments.