NEC SV7000 To Place a Call on Hold, To Place a Call on Exclusive Hold, To retrieve, If unanswered

Page 46

To Place a Call on Hold

Press Hold. Held line flashes.

Note: If held line appears on other Dterm stations, the associated LED flashes red slowly.

To retrieve

Lift handset or press Speaker.

Press held line. Use handset to converse.

Note: Any station with this line appearance can retrieve the call.

 

Held station

 

number

HOLD

2001

4:26 PM

TUE 13 APR 2004

 

 

If unanswered

After preprogrammed time, Automatic Recall is initiated.

Visual and audible signal (rapid flash and ring burst) is sent to station that placed call on hold.

Note: Hold shows as a flashing green LED on your phone. The same line on other phones shows as a flashing red LED. Recall shows as a flashing green LED on your phone and flashing red LED on other phones with the same line.

.

.

To Place a Call on Exclusive Hold

Press Hold twice. Line appearance indicates interrupted wink.

Note: If held line appears on other Dterm stations,

LED remains steadily lit red.

To retrieve

Lift handset or press Speaker.

Press held line. Use handset to converse.

Note: Only the Dterm that set Exclusive Hold option can retrieve the call.

 

Held station

 

number

E_HOLD

2001

4:26 PM

TUE 13 APR 2004

 

 

– 42 –

Image 46
Contents User Guide Liability Disclaimer NEC CorporationTable of Contents Boss/Secretary MW Lamp Control Face Layout Dterm4D IP Dterm8D and Dterm8D IP Dterm16D and Dterm16D IP Exit Call Indicator LampLCD Note Soft KeysRecall FeatureProgrammable Keys Directory NoteDterm IP Adapter Dterm16LD and Dterm16LD IP Speakerphone Display Feature Name 21 16LD DisplayUser’s Status Network Specification Rear ViewDterm8D IP, 16D IP, 16LD IP, 32D IP Adjustable Removable Base Quick Disconnect Button Optional Adapter supported Base ViewCisco Discovery Protocol Keys and Lamps Programmable KeysSIG LampsFunction Key Activities LCDSoft Keys MIC DNDDefault Function Displays for Each Status Connection BusyMIC MIC DND Consultation Hold TransferSoft Key Features Conf Three-way Calling CAS CAS-Switch Hook FlashPick Call Pickup Group Voice Voice CallButton SIG Manual SignalingMIC Microphone On/Off Hset HeadsetDisplay Function Next Visit Survivable Remote MGCRmute Ringer Mute Display Function PreviousTerminal Setup with the Up/Down Key RingTo adjust LCD contrast Microphone On/Off Terminal Setup with the Feature KeyTo adjust initial receiving volume RCV VOL SmallTone No Frequency Hz Modulation Hz To select ringer toneRinger TONEn 426 PM TUE 13 APR Call Indicator lamp on/off To adjust transmission/receiving volumeTo activate hands-free Dynamic Dial Pad on/off Direct Dial Pad on PM TUE 13 APR Direct Dial Pad OFFLogin/Logout IP Enabled Dterm/Dterm IP Only To LoginTo Logout Multiline Appearance To Originate an Outside CallTo Originate an Internal Call To originateTo verify with Dterm 4D/8D/16D/16LD/32D To Originate a Call Using Speed Calling One-touch ButtonsTo program Speed SETTo operate from the Speed Calling System key To Originate a Call Using Speed Calling Individual/GroupTo Originate a Call Using Speed Calling System To operate from the Directory keyForced Account Code To enter account code after authorization codeAccount Code To enterTo enter without account code Authorization CodeVoice Call To enter with account code see aboveMIC Voice Voice Busy Using the Soft keyTo Answer a Voice Call Hands Free Voice RestTo bridge into an automatic intercom call Automatic IntercomTo initiate ICM426 PM TUE 13 APR Calling party Manual IntercomTo bridge into a manual intercom call Press MICM, lift handset or press SpeakerTo bridge into a dial intercom call Dial IntercomPress the Dicm key, lift handset or press Speaker To retrieve To Place a Call on HoldTo Place a Call on Exclusive Hold If unanswered426 PM TUE 13 APR Transferring station To Transfer a Call426 PM TUE 13 APR Transferred station Or trunk number Transfer DDDTo Establish a Broker Call ConferencePM TUE 13 APR MIC To program call waiting key on one-touch speed calling key To Answer a Camped-on CallCall Waiting Originating To activate call waiting originatingWait SET To answer a waiting callTo disconnect 426 PM TUE APR Called station NumberTo park a call Call ParkTo program call park key on one-touch speed calling key To retrieve a parked call from originating stationCall Pick-up Group When station within pick-up group ringsWhen a station within the system rings Call Pick-up DirectIf trunk busy Outgoing Trunk QueuingOff-hook Trunk Queuing Pick UPIf called station is busy Executive OverrideLast Number Redial To Recall the Last Number DialedCall Forwarding All Calls To setForward Cancel To cancelCall Forwarding Busy Line PM TUE 13 APR MIC Forwarding station Forward SETForward Call Forwarding Don’t Answer Logged Out IP Station Call Destination PM TUE 13 APR MIC PM TUE 13 APR Called party Call BackCallback SET CallbackTo save To Save and Repeat a NumberTo repeat To display To Leave a MessageTo Answer a Message To respondVoice Mail System Message CancelTo erase To answer station B Meet-me PagingTo page station a PagingTransferddd 3 426 PM TUE 13 APR Paging TransferStation a paging Transfer XxxxIf boss accepts call Boss/Secretary TransferSecretary If boss refuses callBoss/Secretary MW Lamp Control To cancel at boss’ stationCancel To set MW at boss’ stationBoss Boss/Secretary OverrideTo program boss/secretary override key 426 PM TUE 13 APR OptionWhile idle on hook DND CancelDo Not Disturb DND SETCall Redirect Call Redirects to the Call Forward-Don’t Answer DestinationUsing the Soft Key While off-hook MIC Privacy CancelPrivacy Privacy SETWait P-RLS? Privacy ReleaseRLS? Index Originating a Call Using Speed Calling LCD Indication Icmx Indicator O/OFFMW SET/CANCEL MSG Xxxx HhmmpmPick UP Xxxx Privacy SET/CANCELOverride Xxxx RLS SET

SV7000 specifications

The NEC SV7000 is a robust unified communications platform designed to meet the needs of businesses seeking a reliable and feature-rich telephone system. This next-generation communication solution offers a wide range of functionalities that enhance collaboration, productivity, and customer engagement.

One of the standout features of the NEC SV7000 is its scalability. It caters to businesses of all sizes, from small enterprises to large corporations, allowing them to easily expand their communication capabilities as they grow. With support for thousands of users, the SV7000 can adapt to changing business needs without the need for extensive hardware investments.

The SV7000 incorporates advanced VoIP (Voice over Internet Protocol) technology, enabling users to make phone calls over the internet instead of traditional phone lines. This not only reduces costs but also provides greater flexibility in managing communications. The system supports SIP (Session Initiation Protocol) for seamless integration with various applications and devices.

Another key characteristic of the NEC SV7000 is its comprehensive set of unified communications tools. Whether it’s instant messaging, video conferencing, or collaborative workspaces, the system facilitates enhanced communication among team members. This integration of various communication channels helps to streamline workflows and improve overall productivity.

Additionally, the NEC SV7000 features advanced call management capabilities. The platform supports automated attendants, call routing, and voicemail options, ensuring that calls are efficiently managed and that customers receive timely responses. Furthermore, its robust reporting and analytics tools provide insights into call volume, response times, and user performance, allowing businesses to make data-driven decisions.

End-user experience is a priority with the SV7000, and it offers a user-friendly interface that can be accessed through various devices, including smartphones, tablets, and desktop computers. This flexibility allows employees to stay connected and productive regardless of their location.

Moreover, the NEC SV7000 places a strong emphasis on security. The system is equipped with features that protect against unauthorized access and ensures the privacy of communications through encryption and secure protocols.

In summary, the NEC SV7000 is a versatile and powerful unified communications platform that combines scalability, advanced technologies, and robust features to provide businesses with the tools they need to enhance communication and collaboration. Whether for call management, unified communications, or security, the SV7000 stands out as a comprehensive solution tailored for modern business environments.