Replacing a Stored Number

When you enter the memory location number, any number previously stored for the memory location is replaced.

Erasing a Stored Number

1.Remove the handset from the base unit.

2.Press memory twice.

3.Enter the memory location number (0~9) you want to erase. (You will hear a long beep confirming the number has been erased.)

Selecting a Different Channel

You can manually change the telephone channel for clearer operation. There are 30 factory-set channels from which you can select. (Changing channels only works when the telephone is in use.)

1.Remove the handset from the base unit.

2.Press channel. (The talk/battery low LED flashes, indicating the telephone is changing channels.)

3.Continue step 2 until you find a clear channel.

Traveling Out of Range

When you begin to move too far away from the base unit, you will hear a clicking sound. As you travel further out of range, the voice transmission begins to break up. Once you have passed the range limits of the base unit, the call terminates.

Page/Find Button

Page/find only works when the telephone is not in use.

1.Press page/find on the base unit for a five-second beep.

2.Press and hold the page/find button for a longer beep.

3.Once the handset has been located; press talk on the handset to end the page/find feature.

4.If you do not wish to make a call at this time, press talk again to hang up.