NEC Dterm Analog Cordless Telephone manual Beltclip Installation

Page 8

Beltclip Installation

1.Insert the beltclip into the holes on each side of the handset.

2.Press down firmly until it clicks into the holes.

If you have wall mounted the base, you cannot place the handset with the keypad facing inside. Pull both sides of the beltclip out of the holes to remove.

Dterm Analog Cordless is hearing aid compatible.

Image 8

Contents Dterm Analog Cordless Controls and Functions Using Your Phone Connecting the Base UnitReceiver, Ringer Tone and Volume Control Muting the HandsetFlash Button Storing a NumberChain Dialing Storing Mixed Tone/Pulse NumbersDialing a Stored Number Replacing a Stored Number Erasing a Stored NumberSelecting a Different Channel Traveling Out of RangeHeadset Installation Setting the Dial Mode SwitchCharging the Battery Low Battery IndicatorBeltclip Installation Optional Available Parts 750229-0