54 Using additional bases
The default PIN code is 0000.
If registration is unsuccessful, after 1 minute, the handset will display the list of registered bases and you can try again or select another base to use.
If you are in an environment where there is a lot of electrical interference you may experience difficulty registering to a base.
When the base is located, you will hear a confirmation tone and PIN? will be displayed.
7.Enter the base PIN code and press Menu .
You hear a tone to confirm you have entered the correct code and the handset returns to idle mode.
Once registered you will hear a confirmation tone and the next available handset number is allocated and shown in the display.
Selecting a base to use
If your handset has been registered to more than one base you can select which one it uses.
1.Press Menu .
2.Press Volor until REGISTER is displayed then press Menu .
3.Press Volor until SELECT BASE is displayed then press Menu .
4.All bases that your handset is registered to will be displayed, e.g. BASE 1 2 3 4
The base that you are currently registered to will flash.
5.Enter the number of the base you want to use.