BT manual BT Studio 1500 multiple pack owners only, Battery performance, Handset numbers

Page 8

8

Getting started

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery performance

When the handset has linked with the base the idle

 

To keep your batteries in the best

 

display will be shown:

 

condition, leave the handset off

 

the base for a few hours at a time

 

 

 

 

 

 

 

 

Running the batteries right down

 

 

 

 

 

 

 

 

at least once a week will help them

 

 

 

 

 

 

 

 

last as long as possible.

 

 

 

 

 

 

 

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk/standby time. Eventually they will need to be replaced. New batteries are available from the BT Studio 1500 Helpline on 0870 605 8047.

After charging your handset for the first time, subsequent charging time is about 6–8 hours a day. Batteries and handset may become warm during charging. This is normal.

Handset numbers

Once registered with the base, each handset will display its

handset number, , , , respectively.

STUDIO 1

You should charge the handset for at least 16 hours on first charge.

5.Once fully charged, plug the telephone line cord into the telephone wall socket.

BT Studio 1500 multiple pack owners only

BLocation

You need to place your BT Studio 1500 charger close enough to a mains power socket so that the cable will reach.

You will need to do the following for each additional handset:

Image 8
Contents User Guide Welcome… SectionGot everything? BT Studio 1500 handset BT Studio 1500 base This guide General information Using the answering machine Remote access Signal strength Getting startedHandset range Which socket?Talk/Standby time Battery symbolsBattery low warning Handset numbers Battery performanceBT Studio 1500 multiple pack owners only Getting started Getting to know your phone Handset buttonsPhone/Person Envelope External call Internal call Sample screen These are where the handset icons will appearPhonebook Menu Key lock Signal Base buttons and LEDs Phonebook SET UP Handset Register Navigating the menusUsing the phone Auto-answerEarpiece volume While the phone is ringing Delete a redial number Press Menu to confirmPhonebook Store a phonebook entryCharacter map Digit button BlankDial a phonebook entry Press Select a ringer melody 1 to 3 using Volor , then Use ClrKeypad, then press Menu Press Menu . You hear a confirmation beepCaller Display and the calls list Idle screen View and dial a calls list entryDELETE? is displayed Press Menu twice. Add? is displayed Call Waiting Speak to a second callerHandsetSectionsettings Handset ringer melody and volumeTo change the external ringer volume Key beeps Press Volor Auto AnswerRange for out of range warning beeps Selecting a language To switch key lock on Key lockNaming a handset Use the ClrBase settings Security PINBase ringer melody and volume Reset the handset and base Base settingsBase settings Ready to record Default day and timeTo check current day and time Setting Listening to your messages During playback Pause/resume playbackPrevious message Message after thatOutgoing messages Answer and RecordAnswer only Personalise your OGMFor Answer and Record, press Skip or for Answer Only Del to confirm. You then hear Second digit Answer delayWhat is Time Saver? Release Skip to end recording Record a memoMemory full Memory full during a call Power failureCall screening Default Remote access If you make a mistake when entering your PIN you will hear To set a new security PIN. Follow the voice prompts Remote access Using additional handsets If you purchase a new handset to use with yourUsing additional handsets Using additional handsets Using additional bases Using additional bases Default PIN code isUsing additional bases Help Problems Possible cause No ring on the handset Socket and that the mains power is switched onHelp Any risk of interference Handset chargerProblems BT Accessories Replacement Items0870 605 BT Studio HelplineSafety General informationGeneral Hearing aid?Cleaning General information Guarantee Outside of the 12 month guarantee period Returning your phoneTechnical information How many telephones can you have?Switchboard compatibility Switchboard external line access codeDialling mode RecallPress Volor to select either Tone or Pulse then press Offices worldwide
Related manuals
Manual 51 pages 36.45 Kb Manual 60 pages 27.86 Kb Manual 68 pages 3.76 Kb