AT&T 1740 user manual Feature System Options Announcement

Page 4

Feature setup

3.To stop recording, press PLAY/STOP. The system automatically plays back the recorded outgoing announcement.

To review your announcement, press ANNOUNCE/SKIP. The system announces, “Announcement. Press ANNOUNCE to record or press PLAY to play.” Press

PLAY/STOP and the system plays the announcement.

To erase your own recorded announcement, press X/DELETE while the announcement is playing. Calls are then answered with the default announcement.

Feature setup

1.To enter the feature setup mode, press SETUP until the system announces, “Language is... To change the setting, press SKIP or REPEAT. To accept and continue setup, press SETUP.”

2.Press SETUP repeatedly until you hear the desired feature.

3.When you hear the feature you want to modify, press ANNOUNCE/SKIP or

MEMO/REPEAT to scroll through the setting’s options.

4.Press SETUP to save and continue setup.

-OR-

Press PLAY/STOP to save the setting and exit feature setup.-

Feature summary

 

 

FEATURE

SYSTEM

OPTIONS

 

ANNOUNCEMENT

 

 

 

 

Language

“Language is...”

• You may choose English or Español

 

 

(Spanish) for the voice prompts used by the

 

 

system.

 

 

• During setup, the message window displays

 

 

the current language setting (En for English

 

 

or SP for Spanish)

Ring select

“Number of rings...”

• Choose the number of rings before the

 

 

system answers a call. You can set it

 

 

between two and seven rings, toll saver 2/4

 

 

or toll saver 4/6.

 

 

• When the toll saver is set as 2/4, the

 

 

system will answer after two rings if there

 

 

are new messages, or after four rings if

 

 

there are no new messages. When the toll

 

 

saver is set as 4/6, the system will answer

 

 

after 4 rings if there are new messages, or

 

 

after six rings if there are no new messages.

 

 

• During setup, the message window displays

 

 

the number of rings (or 24 for toll saver

 

 

2/4, 46 for toll saver 4/6).

Remote access

“Remote access

• Change the remote access code to any

code

code is...”

two-digit number between 10 and 99.

 

 

• The default remote access code is 19. With

 

 

it, you can access many features remotely

 

 

from a touch-tone telephone.

3

Image 4
Contents Digital answering system Part User’s manualParts list InstallationBefore you install Feature setup Auto reset of answering system clockSet the clock Record your announcementFeature System Options Announcement Feature System Operation Listen to, save & delete messagesRecord memos Answer callsCall screening Call interceptPLAY/STOP Message window displays Message windowDisplay Function Function Command Remote operationCase of difficulty Power failure recovery General product careSystem takes longer than usual to respond Message window is off