F E A T U R E S E T U P
Turn System On/Off
Press Oto turn the system on or off. The message window will display information when the system is on.
Feature Setup
1To enter Feature Setup mode, press and hold Suntil the system announces “Selected announcement is…”
2Press and release Suntil the system announces the feature you want to set.
3Press and release or until the system announces the setting you want. Refer to the Feature Summary for options.
4Press and release Sto set up the
next feature listed on the Feature Summary
— OR —
Press and release Xto exit Feature Setup.
The new settings will be saved.
Feature Summary
Feature/System Announces | Options | |
|
| |
Announce Select | Choose the announcement your callers will hear. | |
| The system comes preset for announcement A. | |
“Selected announcement is...” | • | Select announcement A, , or C when you want |
|
| the system to record callers’ messages. Select AO |
|
| (announce only) when you want the system to |
|
| play an announcement and then hang up. |
| • | If you select announcement A, , or C and do not |
|
| record an announcement, the system plays the |
|
| |
|
| leave a message after the tone.” |
| • If you select AO and do not record an | |
|
| announcement, the system will answer after |
|
| 10 rings and announce “No announcement.” |
| See “Record Your Announcement” under OPERATION | |
| for recording instructions. | |
|
| |
Number of Rings | Choose how many times the line will ring before | |
| the system answers a call. The system comes preset | |
| to 4 rings. | |
“Number of rings is...” | • Set for 2 to 7 rings, or choose Toll Saver 2/4 or Toll | |
|
| Saver 4/6. |
• When set to Toll Saver 2/4, the system answers after four rings when you have no new messages and after two rings when you do. Toll Saver 4/6 causes the system to answer after six rings when you have no new messages and after four rings when you do.
Audible Message Alert
When this feature is on, the system beeps every 15 seconds when you have new messages. Audible Message Alert comes preset to OFF.
2