A T U R E S E T U P, Feature Setup, Feature Summary

F E A T U R E S E T U P

1To enter Feature Setup mode, press and hold S until the system announces “Number of rings is…”

2Press and release S until the system announces the feature you want to set.

3Press and release aor runtil the system announces the setting you want. Refer to the Feature Summary for options.

4Press and release S to set up the next feature listed on the Feature Summary

— OR —

Press and release P to exit Feature Setup.

The new settings will be saved.

5After you have selected the feature options, you can review the settings by pressing and releasing S.

When any feature is on, the Message Window displays

When any feature is off, the Message Window displays

Feature/System Announces	Options

Ring Select	Choose how many times the line will ring before
	the system answers a call.
“Number of rings is...”	•	Set for 2 to 7 rings, or choose Toll Saver 2/4 or
		Toll Saver 4/6.
	•	When set to Toll Saver 2/4, the system answer
		after four rings when you have no new messages
		and after two rings when you do. Toll Saver 4/6
		causes the system to answer after six rings when
		you have no new messages and after four rings
		when you do.
	•	During setup, the Message Window will display
		the number of rings, (8 for Toll Saver 2/4, or 9 for
		Toll Saver 4/6).

Remote Access Code	Change the Remote Access Code to any three digit
	number from 500 to 999.
“Remote access code is...”	•	The Remote Access Code, preset to 500, allows
		you to access many features of this answering
		system remotely from a touch tone phone.
	•	The system will prompt you to repeat Steps 2
		and 3 of Feature Setup until you have set all
		three digits.

Announcement Monitor	Choose ON to hear the announcement when your
“Announcement monitor is...”	system answers a call. Choose OFF to have it silent
	on your end. (Your caller will still hear the

announcement.)

NOTE: Volume must be set to a level you can hear to use Announcement Monitor.