5.3 Filters
On the Filters page, you can set up filters that can selectively allow traffic to pass in and out of your network. The Company AP Router comes with 9 factory default filters for you.
In addition to 9 default filters, some filters may be created automatically to allow Virtual Servers or Special Applications to function.
We strongly recommend that you choose an empty row when you want to set up new filters, because overwriting or deleting these filters may cause some services to be disabled, for example, your client PCs may NOT be able to access the Internet.
Note – If you have overwritten or deleted the factory default filters, you can retrieve them at a later time using the Restore Factory Defaults function on the Tools page. For detailed instructions, see To Restore the Factory Default Configuration.
What do you want to do?
Set up a Port Filtering or Raw IP Filter
Delete a Port Filtering or Raw IP Filter
5.3.1.To Set up a Port Filtering or Raw IP Filter:
5.3.1.1.On the Advanced navigation bar, click Filters. The Filters page appears, seen in FIGURE
47
