X-Micro Tech WLAN 11g user manual Rts

	It is case-sensitive and cannot exceed 32
	characters.
Channel	Selects one IEEE 802.11G channel for
	wireless LAN transmissions from the
	drop-down list.
	Specifies the bandwidth which the wireless
	radio operates. AP and the client stations that
	is associated work in one of channels from 1
	to 14.

4.4.1.5. Enter the following advanced radio parameters:

Parameter	Description
Beacon	Type the time interval in milliseconds
Interval	between beacons broadcast by AP
	(Access Point) in the Beacon Interval box,
	such as 100.
RTS	Type a number in the RTS Threshold box.
Threshold	Also called Request-to-Send Threshold.
	This field specifies the minimum size of
	data frames above which RTS protocol
	is used, ranging from 256 to 2432. RTS
	helps prevent data collision from hidden
	nodes.
Fragmentatio	Type a number in the Fragmentation
n Threshold	Threshold box.
	For efficiency in high-traffic situations,
	large files are split into fragments. This
	field specifies the default packet size, an
	even number ranging from 256 to 2346.
DTIM Interval	Type a number in the DTIM Interval box.
	Also called Delivery Traffic Indication
	Map. This field specifies the number of
	beacon intervals between successive
	DTIMs, ranging from 1 to 255.
Preamble	Select either Short Preamble (72 bits) or
Type	Long Preamble (144 bits).
Distribution	If you want to use Wireless Distribution
System	System on your Router, click Enable
	next to Distribution System, then type the
	distributed client PCs’ physical
	addresses, as described in Step 6.
	Otherwise, click Disable.
	22