4.5.1.2.Type the Old Password in the box. The default password is 1234.
4.5.1.3.Type a New
Password in the box.
Note :
Password must be less than 64 characters.
4.5.1.4.Type the new password in the Confirm Password box.
4.5.2.To Restore the Factory Default Configuration:
4.5.2.1.On the Tools page, click Restore to Default next to Restore Factory Defaults.
The Warning dialog box appears, see FIGURE
FIGURE 4-15: Warning Dialog Box
4.5.2.2. Click OK.
Important:
Restoring the default factory settings will reset all of the router configurations in every page, so we recommend that you backup the configuration data from the Gateway to your PC first using DOS commands. For details, see To Backup or Restore the Configuration Data Using DOS Commands.
In addition, you can also restore the factory defaults using DOS commands. For detailed instructions, see To Backup or Restore the Configuration Data Using DOS Commands.
4.5.3.To Backup or Restore the Configuration Data Using DOS Commands:
For the backup of the configuration data from the Gateway to your PC, Gateway acts as a TFTP server.
30
