To Add a New Static Route | X-Micro Tech WLAN 11g guide

5.11.1.To Add a New Static Route:

5.11.1.1.On the Advanced navigation bar, click Routing.

The Static Routing page appears, seen in FIGURE 5-15:

FIGURE 5-15: Static Routing Page 5.11.1.2. Enter the following static route information:

Paramet	Description
Paramet
er

Destinati	Specifies the network address of the remote
on LAN	LAN segment. For standard class "C" LANs,
IP	the network address is the first 3 fields of this
	Destination LAN IP, the 4th field can be left at
	0.

Subnet	Specifies the Subnet Mask used on the
Mask	remote LAN segment. For class "C" networks,
	the standard Network Mask is 255.255.255.0.

Gateway	Specifies the IP Address of the router on the
	local LAN segment to which this device is
	attached.
	Note that it is NOT the router on the remote
	LAN segment.

Hop	Specifies the number of routers that must be
	traversed to reach the remote LAN segment.
	Valid values are 1 to 16.

Interface	Specifies the interface through which the
	router goes to the next hop or a particular
	network. Available options are WAN, LAN and
	DMZ.

Image 69

X-Micro Tech WLAN 11g user manual To Add a New Static Route

Contents

Wlan 11g Broadband Router XWL-11GRIX USA Federal Communications Commission FCC FCC Radiation Exposure Statement Disclaimer Copyright Contents Product Feature System RequirementsApplications Installation Instructions Installing Your Router To Configure Windows to Receive Dynamic IP Address Configuring Windows for IP NetworkingPage Collecting ISP Information Logon dialog box To Open the Web-based Administration Tool Type admin in the User Name box Type the password in the box To Configure Setup Parameters SetupPage Page Click Enable next to PPPoE Login To Set PPPoE Login Parameters Global Address To Set up Global Address with DMZ Disabled Global Address Page with DMZ Enabled To Set up Global Address with DMZ Enabled To Remove Global Addresses To Set the Wireless Radio Parameters Wireless Mode Description RTS Default Values for Radio Settings To Set Wireless Security Parameters 10 Wireless Security Settings To Set WEP Keys Four newly generated WEP Keys will display in the Key 1 Key On the Wireless page, select Status To Review Wireless Status To Disable Wireless Tools To Change the Administrative Password for Your Router Type the new password in the Confirm Password box To Restore the Factory Default Configuration To Upgrade the Firmware To Reset GatewayTftp -i gatewayIpaddress GET filename Tftp -i gatewayIpaddress PUT filename Upgraded Status Paramet Description Status Detail Disconnected To Set Your Router as a Dhcp Server Dhcp To View the Active IP Table To Disable Dhcp on Your RouterTable, seen in Figure Optional. Click Refresh to obtain the most current data Log To Set up Access Log on Your RouterTo View Session Event Log Click Session Event Log on the Log To View Intrusion Event Log To View Block Event Log To Disable Access Log on Your Router To View Wireless Event LogClick Wireless Event Log on the Log Click Intrusion Event Log on the Log 25 Statistics Statistics AP Radio Lists out the data on the Access Point’s radio Advanced Button on the Basic Window To Toggle between Basic Functions and Advanced Functions Virtual Servers To Set up a Client PC on the LAN as a Virtual Server Well-know Ports Select a Public IP Address from the drop-down list To Delete Virtual Servers on the LAN Filters To Set up a Port Filtering or Raw IP FilterPage Drop-down list Inbound Outbound and Both To Delete a Port Filtering Filter To Delete Filters To Block a Single IP Address IP/URL BlockDo either of the following IP Block page appears, seen in Figure To Block a Specific Domain Name To Block a Range of IP Address To Delete a Specific or All URL Blocks To Delete a Specific or All IP Blocks To Copy a Popular Application to a Specific Line Special Apps Popular Applications List To Configure a Special Application Manually Special Apps Select a line corresponding to a specific ID To Delete Special Applications DMZ Host To Designate a PC in Your Network as a DMZ HostWhat do you want to do? To Delete DMZ Hosts To Clone the MAC Address MAC CloneOn the Advanced navigation bar, click MAC Clone Convenience, seen in Figure Dynamic DNS To Configure a Dynamic DNS Server To Disable a Dynamic DNS Server Proxy DNS To Configure a Proxy DNS Server To Delete a Specific or All Proxy DNS Servers To Disable the Proxy DNS on Your Router Snmp 14 Snmp Enter the following Agent information To Delete Snmp Community Names To Delete an Existing Snmp Trap Receiver Static Routing To Add a New Static Route To Delete a Static Route Glossary Ieee WAN