C. Troubleshooting
Refer to the list below for solutions when the unit is not
functioning properly before contacting your local SHARP
dealer.
Problem | Solution |
|
|
The display remains | ∙ Adjust the LCD contrast |
blank after pressing | (see p.50). |
ON . | ∙ Install new batteries |
| (see p.199). |
|
|
Poor display contrast. | Adjust LCD contrast (see |
| p.50). |
|
|
The Organizer is turned | Reset the Organizer |
on, but pressing keys | (see p.196). |
has no effect. |
|
|
|
“Not enough memory” | The Organizer’s memory is |
displayed. | full or nearly full. Delete |
| unnecessary data. (You can |
| check the amount of free |
| memory using CHECK |
| MEMORY in the TOOLS |
| menu. see p.67). |
|
|
The alarm does not | Enable alarms using the |
sound at the set time. | TOOLS menu (see p.131). |
|
|
The Backlight does not | During data transfer, |
function | |
| the Backlight does not work. |
| If BATT appears, replace |
| batteries (see p.198). |
|
|
D. Battery Replacement
General guidelines
The Organizer uses the following types of batteries:
Use | Type | Size/Model | Qty. | |
|
|
|
| |
General | Alkaline batteries | LR03 (L30) | 2 | |
operation | ||||
|
|
| ||
|
|
|
| |
Memory backup | Lithium battery | CR2032 | 1 | |
|
|
|
|
There are some extremely important points to remember when installing new batteries:
☞• Do not remove the operating and backup batteries at the same time. Doing so will result in the loss of all data stored in the unit’s memory.
•Backup all important data before replacing the batteries.
•Replace the two operating batteries at the same time with new batteries of the same type.
•The memory backup battery installed at the factory at the time of manufacture may have become depleted during shipment and may not have the full battery life indicated in the specifications.
