topic can contain up to 2,048 characters.

To enter the outline shown above:

1.Press OUTLINE to start the application.

2.Press NEW .

A title window appears.

#5-2-2 Display

3.Type in the title you want to give to your outline.

4.Press ENTER .

The View mode opens with the title as the first topic in the new outline. A flashing diamond prompts you to enter a subtopic.

#5-2-3 Display

5.Type the name of the first subtopic, pressing at the end of each line.

#5-2-4 Display

6.Press ENTER .

Alternatively, you can press CANCEL to discard the text you have entered. This will not cancel the entire outline but only the topic that is about to be stored.

If the second and subsequent lines of the topic just entered disappear from view, this is because only the first line of each topic is being shown. This feature allows you to have a lot of information on one page but to see only the first line (heading) of each topic. However, this single-line subtopic display is an option controlled by the user, who can also have all topics displayed in full instead. To do this, select SHOW FULL TOPIC from the application menu. Repeat this procedure to display only the first lines of subtopics, ie. to deselect SHOW FULL TOPIC.

7.Enter the other topics in the list above. Be sure to press ENTER after entering each one.

Notice there is no final command to store the outline. The outline you are currently working on will be stored automatically whenever you exit the outline by displaying another entry, change to Index mode, or start a new outline by pressing NEW .

108

Page 111
Image 111
Sharp OZ-5600 operation manual 108