2.Select any application you wish to use by pressing the corresponding key.
Turning the Organizer on and off
Press ON to turn the power on and OFF to turn the power off. The Organizer will not operate if the battery replacement switch is in the REPLACE BATTERIES position.
Auto power off
To conserve battery power, the Organizer will turn itself off if it has not been used for about 12 consecutive minutes. However, in order to avoid accidentally interrupting data transfers, the auto
If the Organizer’s power goes off automatically before an entry you have been working with is stored in an application, the data will not be lost. When you press ON , the Organizer will return to the same operating state as before the power turned off automatically.
Backlight
The Organizer provides a
BACKLIGHT again to turn it off.
If you press 2nd BACKLIGHT , the Backlight will remain on for as long as you continue to use the Organizer, until you have not typed any key for 15 seconds. This is useful if you want to enter or access some information that will take longer than 15 seconds.
The Backlight will not function during the following conditions:
∙When
∙During data transfer
∙During printing
∙When the battery level is very low.
☞Do not use the Backlight unnecessarily.
∙Since the Backlight drains power from the operation batteries, excessive use of the Backlight will significantly reduce your battery life.
∙Continuous use of the Backlight will, over time, lead to gradual loss of brightness.
If the Backlight is on for 10 minutes per day (e.g. 15 seconds 40 times a day), the brightness will be
reduced by half after 10* years (at an ambient temperature of 23°C and 65% humidity).
*This figure may vary depending on the surrounding environment.
Setting the LCD contrast to suit various
lighting conditions
From time to time, the contrast of the LCD display may have to be adjusted for ideal readability. You may find, for
50
