Sharp OZ-5600 operation manual Setting the Clock

3.Enter your telephone number, then press NEXT . The cursor moves to the ADDRESS field.

4.Enter your full address.

Press to move the start of the next line in

ADDRESS.

5.Press ENTER when done.

A message appears confirming the Owner Information has now been set.

Press ENTER to proceed with setting up the Clock as described below (or CANCEL to quit the User Setup procedure).

Setting the Clock

In order for the Calendar, Schedule, To Do, and other time-based applications to work correctly, the built-in clock must be set to the correct time, date and city. The Clock application displays the time in two different cities: the Local city, where the user normally lives or works, and the World city, which is any other city of the user’s choice. When the Organizer is first initialized, the Local city is automatically set to New York, and the World city is London. Before setting the Clock’s correct time, you should first select the Local City for which you want to set the time.

After entering the Owner Information above, the following list of cities appears:

#1-8 Display

6.If the desired city does not appear, press PREV or NEXT to display more cities.

You can jump to a particular country by pressing the first letter of that country’s name.

7.Select the desired city by moving the cursor to it.

☞If your city does not appear in the list, press SPACE to display the User Cities list, then select USER CITY2. You can change the name to your city later, using the Clock application menu.

8.Press ENTER .

The Daylight Saving Time screen appears.

9.If your city is currently on Daylight Saving Time, press Y , otherwise press N .

The ADJUST TIME/DATE window then appears.

10.Enter the local time, preceding single-digit hours and minutes with “0”.

11.Press PM to select PM or AM for AM, then press

NEXT .

12.Select the time system you want the Clock to use, then press NEXT .

46