X-Micro Tech WLAN 11g user manual To Set up Global Address with DMZ Disabled

4.3 Global Address

On the Global Address page, you can set up NAT (Network Address Translation) to provide internal-to-external IP address mappings.

Have you enabled DMZ on the DHCP page? Depending on whether DMZ is enabled, you may follow different procedural steps.

Notes :

If you want to use Global Address mapping, you must enable NAT on the Filters page. For detailed instructions, see To Set up a Port Filtering or Raw IP Filter.

If you have chosen to retrieve an IP address automatically, you will not need to use this function. Instead, the default public IP address will display on the Global Address page.

What do you want to do?

Set up Global Address with DMZ Disabled

Set up Global Address with DMZ Enabled

Remove Global Addresses

4.3.1.To Set up Global Address with DMZ Disabled:

4.3.1.1.Click Global Address on the navigation bar.

The Global Address page with DMZ Disabled appears, seen in FIGURE 4-5:

FIGURE 4-5: Global Address Page with DMZ Disabled

17