Remote access, To check for messages | BT Response 15+ instruction

Response 15+ - Edition 5 – 26th October ’00

Remote access

You can switch on and operate your Response 15 Plus from another TouchTone phone to play back your messages and memos

Your security code

To help keep your messages private, your Response 15 Plus requires you to enter a 2-digit Security Code before you can play back your messages.

For your security code, look at the swing out label on the underside of the machine. (You cannot change the security code).

If you take more than 8 seconds to enter a number, the Response 15 Plus will announce ‘Thank you for calling’ and disconnect the line.

If you have no messages, you will hear… ‘You have no messages. Thank you for calling.’

…and your Response 15 Plus will disconnect the line.

To check for messages

Dial your Response 15 Plus phone number.

When you hear your outgoing KEYPAD message, press the ✱ button.

You will hear 2 beeps.

The message counter on your Response 15 Plus will flash ‘A’.

KEYPAD Key in the first digit of your security code (within 8 seconds).

KEYPAD Key in the second digit of your security code.

Please note

You will hear 4 short beeps if you have entered the wrong security code

and are invited to enter the code again. Do not re-enter ✱.

You are allowed 2 attempts.

If you have messages you will hear… ‘You have x messages’. Your Response 15 Plus will then play your messages, with the day and time they were recorded.

To switch your Response 15 Plus on

This is useful if you forgot to switch on your answering machine before going out.

KEYPAD Ring your Response 15 Plus phone number. After 20 rings your Response 15 Plus will answer. When you hang-up, the answering machine will be switched on and will answer calls.