Response 15+ - Edition 5 – 26th October ’00
Setting up
Follow these steps to set up your Response 15 Plus ready for use
Plan the location of your Response 15 Plus
Situate your Response 15 Plus close enough to the phone and mains power sockets so that both cables will reach.
1Check your telephone wall socket
3Plug the adaptor into a mains power socket
If you do not have a modern phone socket, call Freephone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service.
2. Plug the mains power cord into the back of the machine
The display will flash for 20 seconds.
It will then show the normal ‘no messages’ display. The display will flash slowly until any button is pressed.
4Insert the back-up battery
Before inserting the
BT recommends that you insert an alkaline PP3 9V battery (not supplied) to provide up to 6 hours
USE ONLY APPROVED | TELEPHONE |
9V DC ADAPTOR |
|
5