Avaya 555-015-162 Connecting the Callmaster VI to the PC, Callmaster VI to PC Connection

Page 13

Connecting the CALLMASTER VI to the PC

The CALLMASTER VI relays call information to and from the PC over the Electronic Industry Association (EIA/TIA-574) cable. The PC uses this interface to dial and provide a graphical user interface to the DEFINITY ECS. See Figure 4 for an example of this connection.

1.EIA (labeled)

2.Connection to the CALLMASTER VI

3.EIA/TIA-574 Cable

4.Connection to a Serial COM Port on the PC

Figure 4: CALLMASTER VI to PC Connection

To connect the CALLMASTER VI to the PC, do the following steps:

1.Insert the 9-pin male connector at one end of the EIA/TIA cable into the female D-subminiature connector located in the back of the CALLMASTER VI, labeled “EIA.” Tighten both connector retaining screws.

2.Insert the 9-pin female connector at the other end of the EIA/TIA cable into an unoccupied COM port in the PC. Tighten both connector retaining screws.

NOTE: Write down which COM port connection is being used, because this information will be required during the software installation process.

7

Image 13
Contents Comcode 107969602 Issue June Hearing AID Compatibility Interference Warning Information USE Important User Safety InstructionsService Installation Warning Important Safety Warnings For InstallationHeadset Jacks About the Callmaster VI Voice TerminalButtons HandsetVoice Announcement Recording Important Notes on Installation Installing the Callmaster VI Voice TerminalChecklist of Items Distance LimitationsChecklist Of Items Description Installation ProceduresSupport Installation DiagramDefinity ECS Connecting the Callmaster VI toCallmaster VI to PC Connection Connecting the Callmaster VI to the PCStarset* Headpiece Connecting the HeadsetsDesignation Strips Testing the HeadsetLog In Button Feature ButtonsMute Button Headset On/Off ButtonCall Appearance Buttons Message Waiting IndicatorRelease Button Write Call Fax Order Ordering Documentation