Bogen UTI1 specifications Introduction

Page 5

Introduction

The UTI1 Paging System is a paging and signaling system.The system provides the following features and functions:

Voice Channel

•Single-zone paging

•Telephone interfaces:

-loop start trunk

-ground start trunk

-station access (analog ring-up)

-page port contact closure activation

-page port voice activation

•Override paging (using loop start trunk or page port contact closure activation)

•Two audio outputs (both with level controls):

-paging and background music

-paging only

•Each output can provide audio for 150 Bogen one-way amplified speakers, also compatible with 70V amp inputs

•Pre-Announce/Confirmation Tone

•Adjustable Automatic Level Control with threshold and active indicator

Background Music

•High impedance transformer isolated BGM input with volume control

•Variable music mute

Signaling Tones

•Night Ringer (contact closure activation)

•Tone Trigger (tone and duration selectable, closure-activated)

Other Features

•C-form contact set with programmable activation events

•Non-volatile memory for setup data (no backup battery required)

•Setup Tone to assist in volume setting, etc.

•Pluggable terminal strips

•Microcontroller-based operation

•DTMF setting of operating parameters

Package Contents

•(1) UTI1

•(1) Installation and Use Manual

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Universal Telephone Interface UTI1 Model FCC Statement Part 15 Radio Frequency Interference Contents UTI1 Feature Callouts Introduction Wall Mounting InstallationTelephone System Connections Telephone Interface Wiring Connections & SetupTrunk Disconnect PBX Loop Start Trunk PortPBX Page Port Contact PBX Ground Start Trunk PortPBX Analog Station Port PBX Page Port VOXOverride Input Other Connections Controls Reference TonesVOX Timer Default TimerReset Default Values System ProgrammingAUX Relay Contact Event Enable/DisableExample Dtmf Block Feature Codes & DefaultsSpecifications Block Diagram Limited Warranty
Top Page Image Contents