Bogen UTI1 specifications Specifications

Page 18

Specifications

Input Impedance:	600 ohms
Input Level:	-10 dBm nominal
VOX Sensitivity:	-30 dBm
Music Source Input Impedance:	8 to 600 ohms
Music Input Level:	-10 dBm
Output Impedance:	8 ohms
Output Level:	-10 dBm nominal
Contact Closure:	2A @ 30V DC
	0.6A @ 125V AC
DC Output:	1A @ 24V DC
Voltage:	120V AC
Current:	0.5A
Temperature:	0 to 104º F
Humidity:	0 to 85% non-precipitating
Dimensions/Weight:	123/16" W x 51/4" H x 21/2" D
Weight:	5 lb.

18

Image 18

Contents Universal Telephone Interface UTI1 Model FCC Statement Part 15 Radio Frequency Interference Contents UTI1 Feature Callouts Introduction Installation Wall MountingTrunk Disconnect Telephone Interface Wiring Connections & SetupTelephone System Connections PBX Loop Start Trunk PortPBX Ground Start Trunk Port PBX Page Port ContactPBX Page Port VOX PBX Analog Station PortOverride Input Other Connections Controls Tones ReferenceReset Default Values Default TimerVOX Timer System ProgrammingEvent Enable/Disable AUX Relay ContactExample Feature Codes & Defaults Dtmf BlockSpecifications Block Diagram Limited Warranty