Panasonic Troubleshooting Guide for SC-NE3 Speaker System
Page 16

Bluetooth®

Pairing cannot be done.

≥Check the Bluetooth® device condition.

The device cannot be connected.

≥The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again.

≥This unit might be connected to a different device. Disconnect the other device and try pairing the device again.

The device is connected but audio cannot be heard through this unit.

≥For some built-in Bluetooth® devices, you have to set the audio output to “SC-NE3” manually. Read the operating instructions for the device for details.

The sound is interrupted.

≥The device is out of the 10 m (33 ft) communication range. Bring the Bluetooth® device closer to this unit.

≥Remove any obstacle between this unit and the device.

≥Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Bring the Bluetooth® device closer to this unit and distance it from the other devices.

≥Select “MODE 1” for stable communication. (l 12)

Remote control

The remote control doesn’t work properly.

≥The remote control and this unit are using a different code. (l right, “REMOTE ”)

≥Is the battery depleted or is the battery inserted incorrectly? (l 5)

Messages

The following messages or service numbers may appear on the unit’s display.

“AUTO OFF”

≥The unit has been left unused for about 30 minutes and will shut down within a minute. Press any button to cancel it.

“DL ERROR”

≥The software download has failed. Press any button to exit. Please try again later.

≥The server cannot be found. Press any button to exit. Make sure that the wireless network is connected to the Internet.

“DIMMER”

≥Appears 10 seconds after the volume is turned to “0”.

“ERROR”

≥Incorrect operation is performed. Read the instructions and try again.

“F ” (“ ” stands for a number.)

≥There is a problem with this unit.

Note down the displayed number, disconnect the AC power supply cord and consult your dealer.

“FAIL”

≥Updating or setting has failed. Read the instructions and try again.

“LEVEL 0”

≥There is no link between this unit and the wireless network router.

Try the following operations:

–Check that the wireless network router is turned on.

–Turn this unit off and on again.

–Reset the wireless network settings. (l 7)

If the problem persists, consult your dealer.

16

VQT4U49

“LEVEL j”

≥When “D.CONNECT” is set to “ON” the Wi-Fi signal strength cannot be checked. To check the Wi-Fi signal strength from the wireless network router, set “D.CONNECT” to “OFF”.

(l 10)

“LINKING”

≥This unit is communicating with the wireless network router to complete the network settings.

Depending on the wireless network router this process may take a few minutes. Try moving this unit closer to the wireless network router.

“NOCONNECT”

≥This unit is not connected to the network. Check the network connection. (l 7)

“REMOTE ” (“ ” stands for a number.)

≥The remote control and this unit are using different codes. Change the code on the remote control.

–When “REMOTE 1” is displayed, press and hold [OK] and [ , AUX] for more than 4 seconds.

–When “REMOTE 2” is displayed, press and hold [OK] and [SOUND] for more than 4 seconds.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model No. SC-NE3 AC power supply cord Button-type battery Lithium batteryPlacement Do not Ingest Battery Chemical Burn HazardTable of contents About Bluetooth AccessoriesUnit care Before using for the first time To replace a button-type batteryControl reference guide Top viewConnect the AC power supply cord To a household AC outlet AC Power supply cord suppliedConnections To select the sound input level of the external deviceNetwork settings Compatible AirPlay devicesWPS identifier mark Using the WPS Push Button Configuration PBCAfter step Advanced network settings Using AirPlay with this unit’s speakers Continue to of Using AirPlay with this unit’s speakersDirectly streaming to this unit AirPlay Select Panasonic NE3 *1, 2 from AirPlay iconPlaying back music files on the Dlna server Playback modesSupport format of Dlna client RepeatBluetooth operations Sound adjustment OthersSoftware update Wireless network name Ssid Changing the unit and remote control codeChecking the software version IP/MAC AddressCommon problems TroubleshootingAirPlay operations Remote control BluetoothMessages Installation accessories Supplied accessories Additionally required accessories Commercially availableSafety precautions Attaching the unit to a wall optionalAttach the fall prevention cord not supplied to this unit Fix the safety holder onto the unit with the screw suppliedAttach the fall prevention cord not supplied to the wall Wi-Fi/AirPlay Section SpecificationsLicenses Dispositivos Bluetooth de sincronización Conexión de un dispositivo Bluetooth sincronizadoDesconexión del dispositivo Bluetooth ConexionesLimited Warranty Panasonic Products Limited WarrantyLimited Warranty only for Canada Panasonic Canada IncLimitations and Exclusions Contact InformationEnglish FCC Note Following Applies only in the U.S.AFollowing Applies in the U.S.A. and Canada

SC-NE3 specifications

The Panasonic SC-NE3 is a compact and versatile audio system designed to deliver high-quality sound in a stylish package. Ideal for music enthusiasts and casual listeners alike, this system combines modern technology with user-friendly features that enhance the overall listening experience.

One of the standout features of the SC-NE3 is its powerful sound output, made possible by the incorporation of a 20W RMS amplifier. This ensures that users can enjoy rich and vibrant audio that fills the room, whether it's for parties, movie nights, or just relaxing at home. The system also includes a pair of full-range speakers that enhance clarity and depth, providing an immersive audio experience.

The SC-NE3 offers multiple connectivity options, making it compatible with a wide array of devices. Users can connect their smartphones, tablets, or other Bluetooth-enabled devices wirelessly, allowing for seamless streaming of their favorite music from popular applications. For those who prefer a wired connection, the system supports auxiliary input, providing flexibility based on the listener's needs.

Another significant feature is the built-in FM radio tuner, which grants access to various radio stations. This is an excellent addition for users who enjoy live broadcasts, talk shows, and music from local stations. The unit also includes a USB port, enabling users to play music directly from USB flash drives, making it easy to enjoy stored files without the need for other devices.

The SC-NE3 boasts a sleek and modern design, making it a stylish addition to any room decor. The compact size allows it to fit comfortably on shelves or desktops without taking up too much space. Additionally, the user interface is straightforward, with controls that are easily accessible and intuitive.

In terms of sound customization, users can leverage the built-in equalizer presets, which allow for adjustments based on personal preferences and types of music. This feature ensures that users always have the best possible listening experience tailored to their taste.

Overall, the Panasonic SC-NE3 offers a compelling mix of audio performance, connectivity, and user-friendly features, making it an excellent choice for anyone seeking an all-in-one sound solution for their home. Whether for casual listening or more immersive audio experiences, the SC-NE3 is designed to meet diverse audio needs while maintaining a chic aesthetic.
Top Page Image Contents