Line jack on top side of telephone, Dial pad, Handset

The TOP VIEW includes the following:.

1) LINE jack (on top side of telephone)

This jack, located on the top/rear of the set, is used to connect the telephone and the modular wall jack. Use the 7-foot cord that comes with the set.

2) Ringer indicator/Message light

This indicator flashes when the telephone rings with an incoming call. The light also flashes when you have a message.

3) Dial pad

The standard dial pad can be used for normal dialing.

4) FLASH button

This button is used with PBX systems to activate special PBX facilities such as Hold or Transfer which may be available in your PBX.

Note: If you press the switchhook on your telephone rather than the Flash button, the line and the call will be released automatically. After a minimum of two seconds, you will hear dial tone and you may begin dialing.

5) Handset cord jack

This jack, located on the left side of the set, is used for connecting the handset with the telephone.

6) Handset

The handset is used for placing and receiving calls.