telephone is subsequently used. If your telephone does not work properly, refer to the information below which describes how to get service for your telephone.
Service
1Before cleaning, unplug the telephone from the modular wall jack. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. (See General Care and Maintenance later in this manual.)
2Unplug the telephone from the modular wall jack. Be sure to refer servicing to qualified service personnel when these conditions exist:
—If liquid has been spilled into the telephone.
—If the telephone has been exposed to rain or water.
—If the telephone does not operate normally by following the operating instructions, adjust only those controls described in these instructions. Do not attempt to adjust any other controls since doing so may result in damage to the telephone and will require extensive work by a qualified technician to restore the telephone to normal operation.
—If the telephone has been dropped or the housing has been damaged.
—If you note a distinct change in the performance of the telephone.
WARNING: When this product is located in a separate building from the telephone communications system, a line current protector MUST be installed at the entry/exit points of ALL buildings through which the line passes.
The following are the ONLY acceptable devices for use in this application:
•Lucent Technologies
SAVE THESE INSTRUCTIONS
When you see this warning symbol on the product,
!refer to the instructions booklet packed with the product for more information before proceeding.