BT 450 manual To dial a number Stored Quickdial memory, Storing numbers Longer than Digits

To dial a number

stored in the

Quickdial memory

1Lift the handset.

2Press the QUICKDIAL button.

QUICKDIAL

3Press the 0 -9location under which the number you require is stored.

JKL

5

The phone number is dialled automatically.

Storing numbers

longer than 16

digits

Telephone numbers longer than 16 digits can be stored by entering the first 16 digits in one memory location, then storing the remaining digits under a second memory location.

To dial numbers longer than 16 digits

1Lift the handset.

2Dial the first 16 digits by pressing the M1, M2, M3 or Quickdial button under which the second part of the number is stored.

The whole number is stored automatically.

To redial a number

1Lift the handset.

2Press the REDIAL button.

REDIAL

The last number called is redialled automatically.

To store a pause

1Some switchboards can take a short time to pick up an outside line. You can insert a pause as required to allow for this delay.

2Press the REDIAL button at the required point when storing a number. The pause is stored in the memory.

REDIAL

When dialling normally, pressing the REDIAL button will enter a pause in the number

9