BT manual Installing Your, Your Converse 420 can be wall-mounted. See ‘Wall- mounting’

Installing

your
Converse	420

Situating your

Converse 420

Situate your Converse 420 close enough to a phone socket so that the cables will reach.

Do not stand it on carpets or other similar surfaces that generate fibres.

Install the batteries

The display on your Converse 420 is powered by 3 x AAA alkaline batteries. (Available separately.)

+ +

+

This ensures the phone will work with all modern digital exchanges.

If your phone does not work when you dial a number, try setting the dialling mode to P.

If you are connecting to a switchboard, check with your switchboard operator or communications manager on which dialling mode you need.

Set the time

Your Converse 420 can be wall-mounted. See ‘Wall- mounting’.

Warning

Your Converse 420 is only designed to be operated in a normal office or domestic environment. It should not be used in bathrooms or near water.

Check your

telephone wall socket

If you do not have a modern-style socket, call Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service.

1Make sure the phone is not plugged in to the phone socket. Open the battery compartment.

2Insert batteries as indicated.

3Close the lid and replace the compartment cover.

Plug your Converse 420 into the phone socket

Check the

dialling mode

P

T

TB

MODE

1Your Converse 420 should be pre-set to T-TBwhich gives you TONE dialling.

1Press and hold the Clock button until the display shows TIME.

2Release the Clock button. Display shows 00-00.

3Enter the current time using the 24 hour clock, eg. 0 9 3 0 = 9.30am,

1 5 3 0 = 3.30pm.

4Press the ✓ button.

The time is set and displayed.

Your Converse 420 is now ready for making and receiving calls.