Recall button
The Recall button is for use with switchboard services and some BT Select Services.
Five minutes memory
back-up
If you unplug your Converse 420 from the telephone socket and it has fully charged batteries, it will keep all the numbers you have stored in the memory. However, if you unplug your Converse 420 and your batteries are totally discharged, numbers stored in the memory will be maintained for about 5 minutes only.
When your batteries are within about two weeks of total exhaustion, BATT LOW will appear in the display. If you do not replace the batteries and they become totally discharged your Converse 420 will not display anything on the screen.
Using BT
SelectServices
Note
A switchboard can provide a similar range of functions to BT Select Services.
If your Converse 420 is connected to a switchboard, you can simply use it as a normal extension.
Your Converse 420 gives you easy access to the following range of BT Select Services.
Six of the Directory buttons have been
Service | Code |
|
Call Return | 1471 | |
(No charge) |
|
|
|
|
|
Set Divert | ✱21✱ | |
Cancel Divert | #21# |
|
(Quarterly subscription) |
|
|
|
|
|
Call Minder | 1571 | |
(Quarterly subscription) |
|
|
|
|
|
Reminder Call on | ✱55✱ | |
(Pay per call) |
|
|
|
|
|
Reminder Call off | #55# |
|
You can replace the
Call Diversion
You can use your Converse
420to request the network to divert incoming calls to another number.
You can choose to divert:
-all calls
-calls that you do not answer within 5 rings
-calls when your line is already engaged.
To switch
Call Diversion on
1Press the Handsfree button or lift the handset.
2Press the Directory button.
3Turn the Navigator Wheel to select *21* DIVERT ON.
4Press the ✓ button to dial the number.
5Enter the number to which you would like your calls diverted.
6Press the # button and listen for confirmation of your instructions.
To switch
Call Diversion off
1Press the Handsfree button or lift the handset.
2Press the Directory button.
3Turn the Navigator Wheel to select #21# DIVERT OFF.