BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672
Faxing 19
2.Press 
repeatedly until the display shows TX FROM MEMORY then press 
. The document is scanned.
3.When scanning is completed the document is assigned a reference number, e.g. DOC.N.XXXX and the display shows TYPE TIME HH:MM.
4.Enter the time you want the fax to be sent, e.g. 
.
for 6.20pm.
5.Press 
to confirm. Display shows TYPE NUMBER NUM/TOUCH/SPEED.
6.Enter the number or use the
7.Press 
.
You can now enter another number to send the same document to another person.
If the power fails, the document stored in the memory will be cancelled.
Or
Press 
again to confirm. The display shows AUTOMATIC MEMORY TX.
Resend, change number or cancel a stored fax
1.Press 
repeatedly until the display shows TX FROM MEMORY then press 
. Display shows ALREADY ENTERED.
2.Press 
display shows PRINT SETTING?
3.Press 
or 
to switch between the options:
PRINT SETTING? – press | to print a status report of the last |
fax stored in the memory. After printing, the fax returns to standby.
CANCEL SETTING? – press 
to cancel the document and return to standby.
CHANGE PARAM? – press 
to change the time the fax will be sent.
4.Press 
to confirm. Display shows TYPE NUMBER.
5.Enter the number or use the