BT 30 manual Press Display shows Terminal no -9, Receive messages sent to it, Audible alert

BT PaperJet 30 UG – Issue 2 – Edition 2.1 – 17.02.05 – 6672

32 SMS

2.Press to display SERV.CENTRE NO.

3.Press or to display TERMINAL NO.

9 is the default subaddress used by the BT	4.	Press	. The display shows TERMINAL NO. (0-9) 9.
text service. Any texts sent to you without	5.	Enter a one digit number - , different to the subaddress used by your
the subaddress specified will go to
subaddress 9.		other phone (which probably use 9) so that your BT PaperJet 30 can
		receive messages sent to it.

6.Press to confirm.

7.Press to return to standby.

8.When you change the subaddress of your BT PaperJet 30 you should send a text to register the address with the BT text system.

Audible alert

Set your BT PaperJet 30 to give an audible alert whenever it receives at text message. You can switch the audible alert on or off.

1.Press then or to scroll to CONFIGURATION.

2.Press to display SERV.CENTRE NO.

3.Press or to display SMS RX ADVICE.

4.Press to display SMS RX ADVICE N.

5.Press or to switch between options N = no, Y = yes.

6.Press to confirm the option displayed.

7.Press to return to standby.

Message folders	Delete, edit, forward and print texts
The Sent and Written Message folders can	You can view messages in the SENT, WRITTEN and RECEIVED folders
each hold up to 5 texts.
The Received Message folder can hold up to	and then delete or edit and forward them.
30 texts.	Press then or to scroll to SMS SENT XX or WRITTEN or RECEIVED.
1.
When they are full, you must delete texts
before sending new ones.