BT 2100 manual Wall mounting your phone, Using the handset park when the phone is wall-mounted

14Wall mounting your phone

WARNING

Before you wall-mount your BT Converse 2100, check that you are not drilling into any hidden wiring or pipes.

Make sure the telephone line cord will reach the wall socket.

1. Unclip the stand from the base of the
WALL PLUG	SCREW
phone and remove it. Re-route the
telephone line cord towards the
bottom of the phone.
WALL	70 mm

2.Drill two holes in the wall 70mm vertically apart using an 8mm drill bit.

3.Insert the wall plugs if necessary, then insert the screws leaving about 5mm protruding from the wall on which to hang the phone.

4.Slot the holes on the back of the base over the screw heads and gently pull the phone down to fix it securely in place.

Using the handset park when the phone is wall-mounted

If you need to leave the phone whilst on a call, hang the handset on the handset park at the top of the base.

If you experience any problems, please visit www.bt.com/producthelp