Using the phone | 7 |
|
|
Making and ending calls
1.Lift the handset and dial the number you want.
2.Replace the handset to end the call.
Make a call using a headset
Headsets are not supplied with your BT Converse 2100. However, you can purchase headsets (with RJ11 jack) by visiting www.shop.bt.com
1.Plug the headset (not supplied) into the socket marked 
on the underside of the base.
2.Press 
and dial the number. When the headset is in use the headset
indicator (on the 
button) will be lit.
Press 
to end the call.
Receive a call using a headset
1. When the phone rings and the headset is plugged in, press 
to answer.
Redialling the last number
The redial number can up to 32 digits long. If the last number dialled was longer than 32 digits, only the first 32 digits will be dialled.
1. Lift the handset, or press 
, then press 
.
If you experience any problems, please visit www.bt.com/producthelp