ArtDio IPF-3000 manual Dialing Method, Sip

2. Dialing Method

In dialing phase, you could use【MUTE】to correct typos.

(1) Address book

z『Main Menu』=>『1.Address book』『/ 1.Search』(By default【F4】is programmed to access address book).

zPick the target number and press【REDIAL】to dial out.

(2)Call History

zPress【Call History】to choose desired call lists:Missed/Received/Dailed numbers.

zTraverse the list and pick up the target entry.

zPress 【REDIAL】to dial out.

Note: if you press 【Call History】 while its red LED is flashing (indicating there are unviewed missed calls), it will enter the “Missed calls” list directly.

(3) ENUM Dialing

zStarting with【#】for ENUM dialing

zDial the target number (6 digits at least), ending with a【#】to speed up dialing phase. E.g.: to call “tel:+886-3-5295000”, please dial “#88635295000#”。

(4)Intra-Domain Dialing

zEnter the user part of the target AoR or dial alias number directly.

zThe target SIP service domain could be circle by press 【Service Domain】.

zPress 【＃】to finishing dialing.

Intra-domain dialing is applicable if both party registered to the same SIP domain

“QuantierTech.com” has selected as target service domain.

(5) Contact Dialing

zUse 【*】for 『@』 and『.』

zUse 【**】 for 『:』if the target SIP agent does not listen on UDP port 5060.

zPress【＃】to finishing dialing

E.g. 1: to call sip:3200@192.168.10.200, please dial “3200＊192＊168＊10＊200”.

E.g. 2: to call sip:3200@192.168.10.200:5070, please dial ”3200＊192＊168＊10＊200**5070”.

(6)IP Dialing

zUse【*】for 『@』 and『.』

zUse【**】for “:” if the target SIP agent does not listen on UDP port 5060.

zDial【#】to finish dialing.