ArtDio IPF-3000 manual Date/Time, Ringer, Lock

3.Date/Time

zChoose the item and press【HOLD】to configure:

1.Date: System date

2.Time: System time

3.Date format: date displaying format

4.Time zone (default is GMT+00:00）

Use digits key【0】~【9】to switch between +/-

5.DST settings (day-light saving time, default is 0:00)

Note: if you want to keep the date and time you manually set, you must disable SNTP synchronization from 7.3.1-SNTP Mode; otherwise, it will synchronize system time with assigned NTP server.

4.Ringer

1.Ringer volume: (Adjust the ringing volume on incoming calls arrival). z 【＋】and【－】to increase or decrease ringing volume.

2.Ringer type: (Pick your favorite ringing tone)

z 【＋】 and【－】to listen your favorite ringing, press 【HOLD】to save your setting.

z To enable “13. User-defined” ringing tone, you must first record it via handset.

3.Record ring: (Personalize user-defined ringing tone) z Pick up handset to prepare for ring recording.

z Press 【HOLD】to start recording your own ringing tone.

z On finish, press another【HOLD】to stop recording ringing tone.

z You can review the newly recorded ringing tone or press “1.Save” to replace the originally “13.User-defined” ringer type. Press【FUNC】to re-record again.

z You can record nearly 8 seconds customized ringing tone.

5.Lock

z『Main Menu』=>『3.Phone settings』/『8. Lock』

z『1.=Y』to lock out the phone such that it could not make outbound calls (but still could take incoming calls, or『2.=N』to cancel this operation and press【HOLD】to confirm. After locking out the phone, to unlock it, you need the phone password.