Panel Description
Front Panel
1
2 
3
4
5
7
6
1.HDMI IN Port: Connect HDMI or DVI (with adapter) source here.
2.IR IN Port: Connect included IR receiver to this port.
3.IR OUT Port: Use the included IR Emitter for this port.
4.
5.Firmware Update Port: Use Mini USB to USB cable to connect to a Windows computer to update.
6.Yellow Link LED: Signal Indicator for the CAT5e/6/7 OUT port. LED will remain solid, unless there is an issue with the cable or signal, then it will blink.
7.Green Power LED: Power indicator. If plugged in light will remain solid. If LED starts blinking power is intermittent or there is a problem with the cable. If LED is off, no power is passing to the receiver (check your outlet or the power cable).
Back Panel
1
2
3
1.Power Port: Connect included captive screw power adapter here.
2.Ethernet Port:
3.CAT5e/6/7 OUT Port: Connect CAT5e/6/7 cable from here to a compatible receiver. Ex.
atlona.com | 4 | Toll free: |
Local: | ||
|
|