Call COVERAGE/CONSULT, Call Forwarding Follow ME

To prevent other bridged terminals from entering a call (on a per call basis)

1Press the softkey below Excl while active on a call or Press [ Excl xxxxx ] while connected to the call.

NOTE: Pressing the softkey below Excl or pressing [ Excl xxxxx ] again reactivates bridging.

CALL COVERAGE/CONSULT

To answer a call for a coworker for whom you are a coverage point

1Press [ xxxxx ] of incoming call when ring begins or green light flashes.

To talk privately with a coworker after answering a redirected call

1Press [ Transfer ].

●Call is put on hold.

2Press the softkey below Cnslt or Press [ Consult ]

or Dial coworker’s extension.

3Discuss call, if appropriate.

4If coworker is not available, press the fluttering [ xxxxx ] to reconnect to the call

or Press [ Transfer ] again to send call to coworker or Press [ Conf ] to make it a 3-party call.

To temporarily redirect all calls to an extension or outside number

1 Press softkey below CFrwd
or Press [ Call Fwd ]	.
or Dial Call Forward access code	.

2Dial extension or number where calls will be sent.

3Hang up.

1While off-hook, press softkey below CFrwd

or Press [ Call Fwd ] again
or Dial Call Forward cancel code	.
2 Hang up.

To park a call at your extension (for retrieval at any extension)

1Press [ Transfer ].

2Dial Call Park trunk group access

code .

3Dial Call Park zone number.

4Dial an idle Answer-Back channel number.

5Press [ Recall ].

6Press [ Transfer ] again.

7Hang up.

To retrieve a parked call from any extension

1 Dial Answer Back access code .		.

2Dial channel number where call is parked.

To answer a call placed to a member of your pickup group

1 Press	[ Call Pickup ]
or Dial	Call Pickup access code		.

To add another party to a call (for a total of up to three parties)

1Press [ Conf ].

2Dial number of new party and wait for answer or press call appearance of held call.

3Press [ Conf ] again.

To drop the last party added to a conference call

1 Press [ Drop ].