Installing your television set
5 cm
5 cm | 5 cm |
&Positioning the television set
Place your TV on a solid stable surface. To avoid danger do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear.
FM ANT.
- VOLUME +- PROGRAM +
FM ANT
:
éConnecting the aerials
•Use the aerial connection lead supplied and connect the : socket situated at the bottom of the TV to your aerial socket.
•Insert the radio aerial lead supplied into the FM ANT socket located at the bottom of the TV.
•Connect the power lead to the television and the mains plug into the wall socket
•Arrange the leads by passing them through the television stand. Replace the stand cover.
For connecting other appliances see page p.10.
“Switching on
To switch on the set, press the on/off key. A green indicator comes on and the screen lights up. Go straight to the Quick Installation chapter. If the TV remains in standby mode(red indicator), press the P # key on the remote control.
The indicator will flash when you use the remote control.
Quick installation
When you turn on the TV set for the first time, a menu is displayed on screen.This menu prompts you to select the country and language for the menus:
Plug’n’Play
CountryLanguage
GBEnglish
If the menu is not displayed, press and hold down the ”- and ”+ keys on the TV set for 5 seconds to display the menu.
&Use the cursor UP/DOWN on the remote control to select your country and validate with cursor RIGHT.
If your country does not appear in the list, select choice “. . .”
éNext select your language using the cursor
UP/DOWN and validate with cursor RIGHT.
“The search starts automatically.All the available TV programmes and radio stations will be stored. This operation takes a few minutes.The display shows the progress of the search and the number of programs found. At the end of
the search, the menu disappears.
To exit or interrupt the search, press h. If no programme is found, consult the possible solutions p. 12.
‘If the transmitter or cable network sends the automatic sort signal, the programs will be numbered correctly. In this case, the installation is complete.
(If this is not the case, you need to use the Sort menu to number the programs correctly.
Some transmitters or cable networks broadcast their own sort parameters (region, language, etc.). In this case, indicate your choice using the cursor UP/DOWN and validate with cursor RIGHT.
4
