Entering an encryption key

a)Setting the encryption key for the Streamium LCD TV:

1Press the MENU button on the remote control, then

2select ‘Network’, and

3select ‘Encryption Config’.

4Enable WEP Encryption, and enter a 5, 10, 13 or 26 character password (see above) and press the OK button.

>The Streamium LCD TV will try to reconnect to the wireless network and will lose its connection with your computer.

Note that the encryption key is case sensitive, meaning that ‘HELLO’ is not the same password as ‘hello’ or ‘Hello’.

b)Setting the encryption key for your Wireless Network Adapter:

Enter the same encryption key for the Wireless Network Adapter. See the User Manual of the Wireless Network Adapter on how to do this.

>Once you have activated the same encryption key for the Wireless Network Adapter, the connection between the Streamium LCD TV and your computer will be re-established.

Example, for the Philips Wireless USB Adapter:

1Double-click the CPWUA Monitor icon in the lower right corner of your computer monitor.

2Click the ‘Configuration’ tab.

3Adapt the ‘Encryption’ settings in the lower part of this window to match the encryption settings of the Streamium LCD TV.

4Click ‘Apply’ and ‘Save’ to finish.

>The connection will be re-established.

Note : If you have forgotten your encryption key, switch off encryption or set a new encryption key for your entire wireless network and for the Streamium LCD TV.

36

23iF9946_12_StDFU_ENG.p65

36

8/31/04, 4:30 PM

Page 37
Image 37
Philips 23iF9946 user manual Setting the encryption key for the Streamium LCD TV