Program sort
&Press key h.The TV Menu is displayed on the screen.
TV Menu | Install |
|
|
| |
Picture |
|
|
Sound | Language Æ • | 0 |
Features | ||
Install | Country Æ • | 1 |
Mode | Auto Store Æ • | 2 |
| ||
| Manual Store Æ • | 3 |
| Sort Æ • | 4 |
| Name Æ • | 5 |
éWith the cursor, select the Install menu
followed by the Sort menu.
“Select the programme you want to move using
the cursor UP/DOWN and press cursor RIGHT.
‘Then use the cursor UP/DOWN to select the
new number and validate with cursor LEFT.
(Repeat steps “ and ‘ for each program you
wish to renumber.
§ To quit the menus, press ∂.
Manual store
This menu is used to store the programmes one at a time.
&Press the h key.
éWith the cursor, select the Install menu then Manual store:
TV Menu | Manual Store |
| |
|
| ||
Picture |
|
| |
Sound | System | Europe | |
Features | |||
Search |
| ||
Install |
| ||
Mode | Program No. |
| |
|
| ||
| Fine Tune |
| |
| Store |
|
“System: select Europe (automatic detection*) or Western Europe (BG standard), Eastern Europe (DK standard), United Kingdom (I standard) or France (LL’ standard).
* Except for France (LL’ standard), you must select
choice France.
‘Search: press cursor RIGHT.The search starts. Once a programme is found, the scanning stops and its name is displayed (when available). Go to the next step. If you know the frequency of the required programme, this can be entered
directly using the ñ to ô keys.
If no picture is found, consult the possible solutions (p. 12).
(Program No.: enter the required number with the cursor LEFT/RIGHT or ñ to ô keys.
§Fine Tune: if the reception is not satisfactory, adjust using the cursor LEFT/RIGHT.
èStore: press cursor RIGHT.The program is stored.
!Repeat steps ‘ to ! for each programme to store.
ç To quit the menus, press ∂.
Other settings in the Install menu
&Press the h key and select the Install menu: é Language: to change the display language for
the menus.
“ Country: to select your country (GB for Great Britain).
This setting is used for the search, automatic programme sort and teletext display. If your country does not appear in the list, select “. . .”
‘ Auto Store: to start automatic search for all programmes available in your region. If the transmitter or cable network sends the automatic sort signal, the programmes will be numbered correctly. If this is not the case, you need to use the Sort menu to renumber the programmes (see p. 4).
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.). In this case, indicate your choice using the cursor UP/DOWN and validate with cursor RIGHT.To quit or interrupt the search, press h. If no picture is found, consult the possible solutions (p. 12).
(Name : If required, you can give a name to the programmes and external connectors. Use the cursor LEFT/RIGHT to move around the name display area (5 characters) and the cursor UP/DOWN to select the characters.When the name has been entered, use the cursor LEFT to exit.The name is stored.
Note: on installation, the programs are named automatically when an identification signal is sent.
§ To quit the menus, press ∂.
5
