Chapter 15 – Internet connection sharing

Before you press the INTERNET button for the first time, you need to make sure that the Streamium LCD TV has Internet access. Either directly through a wireless base station, or indirectly through a PC with Internet access and router/gateway software (e.g. ICS from the Windows OS) installed and running.

If you connect (either wired or wireless) the Streamium LCD TV to an existing network host with Internet access

Prefered solution:

If you have an existing home network with centrally shared broadband Internet access for all connected computers,you can connect the Streamium LCD TV directly to your central network device : the router/gateway.That way, the Streamium LCD TV can access the Internet just like your other computers and you do not need to install ICS to make Internet access available to your Streamium LCD TV.

If you connect the Streamium LCD TV (by wires or wireless) to a stand-alone or client PC with Internet access

If you connect the Wireless Network adapter to a stand-alone or client PC with an existing broadband Internet connection, you will need to bridge - within that PC - the wireless or wired connection that connects to the Streamium LCD TV, to the existing network adapter that connects to the Internet.You do this by enabling Internet Connection Sharing (ICS) from your Microsoft®Windows® operating system for that PC.This makes the PC share its existing broadband Internet connection with the Streamium

LCDTV.

ICS configuration and usage issues

ICS is intended for use in small networks in which the network configuration and the Internet connection are managed by theWindows-based computer on which the shared connection resides (the ‘host’ computer). It is assumed that on its network, this computer is the only Internet connection, it is the only gateway to the Internet, and that it sets up all internal network addresses (this means it is the DHCP server for the network).

If a network has a central host computer or router that acts as a DHCP server, this server automatically allocates IP addresses, netmasks, and the gateway address to all DHCP client computers and devices in the network.

Important notes

Only MicrosoftWindows98 SE (Second Edition) or higher provides ICS, other operating systems are not supported.You may try to use other router/gateway software at your own discretion.

You should only install Internet Connection Sharing on the computer that you use to connect to the Internet.

The host computer must remain switched on during Internet access sharing.

ICS is router/gateway software with Dynamic Host Control Protocol server (DHCP) functionality. The ICS host computer must be the only DHCP server on the network. Before installing ICS, first disable any DHCP services that are provided on the network (e.g. by a hardware router/gateway or base station).

Refer to the router/gateway manufacturer’s instructions on how to disable its DHCP services.

37

23iF9946_12_StDFU_ENG.p65

37

8/31/04, 4:30 PM

Page 38
Image 38
Philips 23iF9946 Internet connection sharing, ICS configuration and usage issues, Important notes, Prefered solution