Remote control keys
For more information about the STREAMIUM functions, see the separate documentation.
Teletext key (p. 8)
Select peripherals (p.10) Press several times to select the required EXT connector.
Sound mode Used to force programmes in Stereo and Nicam Stereo to Mono or, for bilingual programmes, to choose between Dual I or Dual II. The Mono indication is red when in forced position.
Unused key.
TV / PC / Radio Press one of these keys to switch the television between TV, PC or radio mode (p. 9).
16:9 Format (p. 7)
Cursor (UP/DOWN/LEFT/RIGHT)
These 4 keys are used to move around the menus (<>≤≥).
Menu To call up or exit the menus.
Mute To mute or restore the sound.
Volume
To adjust the sound level.
Smart picture and sound Used to access a series of predefined picture and sound settings.
The personal position relates to settings selected from the menus.
Screen information To display / remove the programme number, the time, the sound mode and the time remaining on the timer. Hold down for 5 seconds to permanently display the programme number on the screen.
Standby
To set the TV to standby mode. To switch the TV set on again, press ., P - + or ñ/ô.
Mode selector *
Previous programme
To access the previously viewed programme.
Surround Sound
To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart. For models equipped with Virtual Dolby Surround*, you can experience Dolby Surround Pro Logic sound effects.
Active control
Optimizes the picture quality depending on the quality of the incoming signal and the ambient light conditions.
Not applicable for TV mode.
Selecting TV programmes
To move up or down a programme. The number and the sound mode are displayed for a few seconds.
For some TV programmes the title of the programme appears at the bottom of the screen.
Numerical keys
For direct access to programmes. For a 2 digit programme number, the 2nd digit must be entered before the dash disappears.
Teletext (p. 8)
*Manufactured under license from Dolby Laboratories.“Dolby” and the
* Mode selector
Press the Select key to select the required mode : TV, DMR (other equipment) or STREAMIUM.
The remote control indicator lights up to display the selected mode. It switches off automatically after 20 seconds if left idle.The remote control automatically returns to TV mode.
For more information about the STREAMIUM functions, see the separate documentation.
3
