Connecting peripheral equipment

Remove the stand cover and the clip on rear panel of the television to expose the connectors. Arrange the leads by passing them through the television stand. Replace the stand cover.

The EXT1 socket has audio, CVBS/RGB inputs and audio, CVBS outputs.

AV in

AV 3

S-VIDEO

FM ANT : EXT 1

Video recorder

FM ANT : EXT 1

VCR

Other equipment

FM ANT : EXT 1

Audio Out

VGA In

Audio In

Carry out the connections shown opposite, using a good quality euroconnector cable.

If your video recorder does not have a euroconnector socket, the only connection possible is via the aerial cable.You will therefore need to tune in your video recorder's test signal and assign it programme number 0 (refer to manual store, p. 5).

To reproduce the video recorder picture, press ñ.

Video recorder with decoder

Connect the decoder to the second euroconnector socket of the video recorder.You will then be able to record scrambled transmissions.

Satellite receiver, decoder, CDV, games, etc.

Carry out the connections shown opposite.

To select connected equipment

Press the µ key to select EXT1.

Most equipment (decoder, video recorder) carries out the switching itself.

10

Page 55
Image 55
Philips 23iF9946 user manual Connecting peripheral equipment, Video recorder with decoder, To select connected equipment